Star Trac 620-7920 manual Personal Viewing Screen PVS Installation Instructions

PERSONAL VIEWING SCREEN (PVS) INSTALLATION INSTRUCTIONS

1

1

8

35

9

4 6

2
	3
					10
		2	4	7

Step 1.

Remove all contents from the packaging and verify that you have the following parts:

1.1 PVS assembly with mounting

2.1 PVS center console assembly.

3.1 hardware kit

4.1 Owner’s Manual

Note: If the center console is being installed on a new unit, then perform this installation prior to mount- ing the display assembly onto the frame.

Step 2.

Verify following items included in hardware kit:

1.(1) Silicon wrap

2.(2) Tie strap

3.(1) M8 nut

4.(1) 5MM Hex (Allen) key.

5.(1) Headphone jack label.

6.(5) Screw M4x.7, 19mm, Pan Head

7.(4) M8 x 20mm Button head screws.

8.(1) Alcohol wipe.

9.(1) E-TRx Hot Bar headphone jack assembly.

10.(1) E-TR headphone jack assembly.

M8 screw with M8 nut on the other side

M8 screw

Step 3.

Mount the PVS bracket on the treadmill. Using the 5mm hex key, screw in the (2) M8 Button- head screws at the base of the PVS first (do not tighten yet). Install (1) M8 Button-head screw into the hole on the PVS neck, then install (1) M8 hex nut on the back side (do not tighten).

Step 4.

Tighten the hex nut on the back of the neck.

39 620-7920 Rev A