Step 13.
Plug the DC power cable from the treadmill neck into either one of the DC connectors on the cen- ter console board.
Step 14.
Plug the center console’s ground cable into the ground cable tab on the back display bracket.
Step 15.
Secure the MYE® center console in place using previously retained screws, then replace and secure the display’s back covers.
Step 16.
Turn power on. Perform a visual inspection, and test the features and functions of the unit prior to use.
Note: Refer to the User’s Manual for calibration in- structions and other settings.
YOU HAVE NOW COMPLETED THE MYE® CENTER CONSOLE INSTALLATION
36 |
|