Star Trac 620-7920 manual Step

Page 9

Step 13.

Install left handrail to the frame as shown using

(3)5/16-18 x 1.0” socket head screws and (3) 5/16 washers. Partially lift up the side bed cov- ers, if necessary. Note the orientation of the mounting plate. DO NOT tighten screws fully yet. Repeat install for right handrail.

Step 15.

Now tighten the 2 front neck screws (5/16-18 x 3.0” socket head) to a torque value of 200 in- lbs (22.5 Nm).

10

Step 14.

Make sure the gap between the rails is closed and, using the 5/32” Hex key, fasten the (2) #10 button head socket screws. Tighten the screws to a a torque value of 45 in-lbs (5.0 Nm). Repeat for the other side.

Step 16.

Tighten the 2 upper neck screws (5/16-18 x 3.0” socket head) to a torque value of 200 in-lbs (22.5 Nm).

620-7920 Rev A

Image 9
Contents Work Instructions General Unpacking Instructions Verify components in box two 1.Neck cover Verify the following tools are included in the hardware kit Installation Instructions Step For E-TRxe model only Step Step Step Step LED Display Console Installation Instructions Step Step YOU have NOW Completed the E-TRx Treadmill Installation Once powered up, all features of the unit function properly This page Intentionally Left Blank Embedded Display Console Installation Instructions Coax cable Contact heart rate Hot Bar Stop Interface YOU have NOW Completed the Embedded Display Installation Rev a This page Intentionally Left Blank IPod Center Console Installation Instructions Screw Step Install the new iPod center console YOU have NOW Completed the iPod Center Console Installation Rev a This page Intentionally Left Blank MYE Entertainment Center Console Installation Instructions Screw Step Step YOU have NOW Completed the MYE Center Console Installation Rev a This page Intentionally Left Blank Personal Viewing Screen PVS Installation Instructions From PVS From Neck TR Headphone Hot Bar Headphone Jack assembly Step DC power jack Step Rev a Star Trac Star Trac Fitnesstm Settings and Testing Maintenance Mode Oper Hours Motor Calibration Elevation Calibration Troubleshooting