Star Trac 620-7920 manual Screw Step

Step 5.

Using a Phillips head screw driver, remove the screw that holds in the headphone jack cap at the lower front of the hot bar. Retain the

screw.

Step 6.

Remove the headphone jack blank cover.

Note: You will no longer need the cover, and if de- sired, you can store it away for any possible future use.

E-TR Headphone	Hot Bar Headphone
jack mount	jack assembly

a b

Step 7.

Identify the two headphone board mounts that came with the kit:

a.E-TR headphone jack mount.

b.E-TRx Hot Bar headphone jack assembly.

Note: You will not need the E-TR headphone jack, if desired, you can store it for any possible future use.

Step 8.

Select the E-TRx headphone mount from the kit and attach it to the available cut-out at the lower front of the hot bar, then secure with previously retained screw.

34 620-7920 Rev A