Star Trac 620-7920 manual From PVS From Neck

From PVS

From Neck

Step 5.

Silicon Wrap

Step 6.

Connect the coax cable coming the treadmill neck to the coax cable coming from the PVS neck, secure tightly.

Now take the 5” silicon wrap from the kit and peel off its protective tape then wrap the two connectors so that all of the metal surface is covered.

Plug-in the coax cable coming from your cable service provider onto the coax connector lo- cated at the base of the treadmill’s frame.

Screws to be removed

Step 7.

Remove the screws to release the standard console and remove wires or harnesses at- tached to the display. Save screws for later use.

40

Step 8.

Remove the standard center console from the display.

Note: You will no longer need the center console, and if desired, you can store it away for any possi- ble future use.

620-7920 Rev A