ELEVATION CALIBRATION
The Elevation Calibration function allows for calibration of the treadmill's elevation function. To enter the Elevation Calibration function:
1.While in the Maintenance Mode, navigate to the Elevation Calibration by the next 
or the previous 
parameter buttons. Press the 
key, the Information Window will display the message “USE INCLINE +/- TO MOVE ELEVATION”.
2.Press the 
key, as necessary, until the treadmill is at its lowest elevation. When desired minimum elevation is obtained, press the 
key.
3.Next press the 
key, as necessary, until the treadmill is at its highest elevation. When desired maximum elevation is obtained, press the 
key.
8. Press the STOP key to exit the Elevation Calibration function.
STAR TRAC E SERIES TREADMILL OWNER’S MANUAL | 41 |