JVC UX-J99DVD manual Recording Discs onto an MD and a Tape, Disc Synchronized Recording

English

Recording on a Tape (Continued)

Recording Discs onto an MD and a Tape	To stop recording, press 7.
—Disc Synchronized Recording	“WRITING” flashes on the display for a while.
	To eject the MD or tape, press 7 to stop the recording, then press
With this recording method, you can start and stop disc play, MD
	the corresponding eject button.
and tape recordings at the same time.

1 Load discs into the 5-DVD changer.

•If the current playing source is not “DVD,” press

DVD 3 (or #¥8 DVD on the unit), then 7 before going to the next step.

•You can make a program (see page 21) or select Random Play (see page 22) if you want. = Go to step 3.

On the remote control ONLY:

2 Press DISC UP or DISC DOWN to select the disc

you want to record, then 7 before going to the next step.

3 Insert a recordable MD into the MD loading slot and put a recordable cassette into the cassette loading slot.

•When you select a track by pressing ¢ or 4 before the disc playback, recording starts from the selected track (except when Program Play is selected).

For the MD:

Set the MD recording length mode, “LP:”-prefix addition mode, and group recording mode (see “Setting MD Recording Modes” on page 46).

•Set the MD recording speed to “x1” by pressing REC SPEED button. You cannot select “x5” to record on an MD and a TAPE at the same time.

For the cassette:

Press REV.MODE to select Reverse Mode as necessary.

To record a single track during play or pause

On the remote control ONLY:

While playing back or pausing a track you want to record, press MD&TAPE REC.

The playback of the track is stopped, and the same track starts playing from the beginning again. This time, the MD recorder and cassette deck start recording the track.

•After the track is recorded, both playback and recording stop automatically.

To record from the desired track

•Select the track before playback, then press TAPE&MD REC.

•When you made a program, you can select one of the programed tracks during playback.

To change the information shown on the display

On the remote control ONLY:

Press DISP/CHARA.

C D	MD	TAPE
1 2 3 4 5	REC LP 2	REC
	GROUP x 1

Elapsed playing time

C D	MD	TAPE
1 2 3 4 5	REC LP 2	REC
	GROUP x 1

4 Press MD&TAPE REC.

Disc play and recording start.

•When you press MD&TAPE REC before or after play, “DSC=MD&TAPE” appears on the display.

•When you press MD&TAPE REC during play, “1TR=MD&TAPE” appears on the display.

The REC (MD recording) and REC (tape recording) indicators start flashing on the display.

MD and tape			Elapsed
recording indicators			playing time
C D	MD SP	TAPE
1 2 3 4 5	REC	REC
	x 1

Current disc tray number

The track number on the disc currently being recorded

When disc player stops, MD recorder and the cassette deck stop automatically.

Remaining recording time

C D	MD	TAPE
1 2 3 4 5	REC LP 2	REC
	GROUP x 1

Current MD track number Current group number*

C D	MD	TAPE
1 2 3 4 5	REC LP 2	REC
	GROUP x 1

*If the loaded MD does not contain any group or more than 99 groups, “G – –” will appear on the display.

When recording on an MD and a tape at the same time

A 4-second blank before each track is not made on the tape.

53