JVC UX-J99DVD manual Troubleshooting, Symptom

Page 94

English

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Power does not come on.

Operations are disabled.

No sound is heard.

Unable to operate the unit by the remote control.

Hard to listen to broadcasts because of noise.

Loaded discs, MD, and cassette cannot be ejected.

The disc does not play.

The disc sound is discontinuous.

No picture appears on the screen.

No picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts.

DVD does not play back.

The left and right edges of the picture are missing on the screen.

No subtitle appears on the display though you have selected the initial subtitle language.

Audio language is different from the one you have selected as the initial audio language.

Unable to record on an MD.

Impossible to record on a tape.

Operations are disabled.

Possible Cause

The power cord is not connected to an AC outlet.

The built-in microprocessor has malfunctioned due to external electrical interference.

•Connections are incorrect or loose.

•A pair of headphones is connected.

•The path between the remote control and the remote sensor on the unit is blocked.

•The batteries are exhausted.

•You are using the remote control too far from the unit.

•Antennas are disconnected.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

•The AC power cord is not plugged in.

•The Disc Lock function is in use.

The disc is upside down.

The disc is scratched or dirty.

•The video cord is not connected correctly.

•Incorrect color system is selected.

•An incorrect input has been selected on the TV or monitor.

•The PROGRESSIVE indicator are flashing though the unit is connected to a TV which does not support progressive video input, such as a conventional TV.

•The color system is not set correctly. Parental lock is in use.

“4:3 PS” is selected when viewing on a conventional TV (aspect ratio 4:3).

•You are using a playback MD.

•The MD is write-protected.

Small tabs on the back of the cassette are removed.

The built-in microprocessor may malfunction due to external electrical interference.

Action

Insert the plug into the socket.

Unplug the AC power cord then plug it back in.

•Check all connections and make corrections. (See pages 6 to 9.)

•Unplug the headphones from the PHONES jack.

•Remove the obstruction.

•Replace the batteries. (See page 6.)

•Signals cannot reach the remote sensor. Move closer to the unit.

•Reconnect the antenna correctly and securely.

•Change the position and direction of the AM loop antenna.

•Extend FM antenna and orient to the best reception position.

•Plug in the AC power cord.

•Cancel the Disc Lock function. (See page 23.)

Put the disc in with the label side up.

Clean or replace the disc. (See page 86.)

•Connect the video cord correctly.

•Select correct color system (See page 9.)

•Select the correct input on the TV or monitor.

•Press PROGRESSIVE until the PROGRESSIVE indicator turns off on the display. (See page 12.)

•Change the color system. (See page 9.) Unlock the parental lock. (See page 81.) Select “4:3 LB.” (See pages 78.)

Some DVDs are programed to always display no subtitle initially. If this happens, press SUB TITLE after starting play. (See pages 29 and 78.)

Some DVDs are programed to always use the original language initially. If this happens, press AUDIO after starting play. (See page 29.)

•Change it with a recordable MD.

•Unprotect the MD. (See page 45.) Cover the holes with adhesive tape.

Unplug the AC power cord and then plug it back in.

91

Page 93 Page 95
Image 94
Page 93 Page 95
Contents UX-J99DVD Page Important for Laser Products Introduction PrecautionsAbout This Manual Contents Location of the Buttons and Controls Remote ControlRemote Control Become familiar with the buttons and controls on your unitFront panel Front PanelDisc trays compartment-5-DVD changer Display window on the front panel Group indicatorReverse mode indicator Display windowUnpacking Connecting AntennasGetting Started Attach the FM antenna to the FM 75 Ω Coaxial terminalAM antenna Connecting SpeakersTo connect an outdoor FM antenna To connect an outdoor AM antennaRelease your finger from the clamp Connecting a TVTo remove the speaker grilles To select the color system Connecting Other EquipmentColor system of TV Color system setting To connect analog audio equipmentTurning On the Power and Starting Playback Setting the ClockBasic and Common Operations Reinforcing the Bass Sound Adjusting the Volume LevelTo turn down the volume level temporarily Press Fade MutingChanging the Display Brightness Adjusting the ToneChanging the Scanning Mode Press Dimmer while the unit is turned onSetting the AM Tuner Interval Spacing Listening to FM and AM BroadcastsPresetting Stations Tuning in to a Preset StationPlayable disc types Playing Back Discs on the 5-DVD ChangerDisc Information About copy protectionDisc structure Playback Control function PBC-SVCD and VCD onlyPlaying Back All the Discs-Continuous Play Loading DiscsLoad discs into the 5-DVD changer Press GROUP/TITLE I or GROUP/TITLE I during playback Basic Disc OperationsPress ¢ or 4 during playback Press ¢ or 4 repeatedly Using the number buttonsPress ¡ or Press DISP/CHARAWhen playing a Svcd or VCD Playing Back by Using the Disc MenuWhen playing a DVD Press TOP Menu or MenuProgram other tracks you want Programing the Track Playing Order Program PlayPress the number buttons to select a disc tray Press DVDTo exit from Program Play To check the programed contentsPlaying at Random-Random Play To modify the programPress Repeat Repeating Playback-Repeat PlayProhibiting Disc Ejection-Disc Lock To exit from Random PlayPress on Screen Advanced Disc OperationsAbout the On-screen Bar Indication Meanings Available discsPress Enter Operation through the On-screen BarPress on Screen twice On-screen guide iconsRepeating Playback Press cursor ∞/5 repeatedly to select Repeat Play modeTo repeat a current title, group, chapter, or all tracks Locating a desired position-Time Search Press cursor ∞/5 repeatedly to select A-BTo repeat a desired portion-A-B Repeat While playing back a DVDTo correct a misentry Ex. When playing a DVD AudioLocating a desired chapter/track Unit starts playback from the specified timePress Audio Selecting the Audio LanguageSelecting the Subtitle Language Press Audio repeatedly to select the desired audio languagePress Angle Selecting a View AngleSelecting Browsable Still Pictures recorded on Press Angle repeatedly to select the desired view angleEx. ST 1 ST 2 L 1 R 1 L 2 R Press Virtual SurroundPress Audio repeatedly to select the desired audio channel ST 1/STPress 8 repeatedly Special Picture PlaybackPress 8 once Press Slow 9 ¡ orRepeat steps 2 to 4 to adjust other parameters Changing the VFP SettingPress cursor 3/2 repeatedly to select the VFP mode Press VFPWhile the key number entry indication appears Playing Back a Bonus GroupSelect a bonus group On the display On the TV screenPress DVD 8 or #¥8 DVD on the unit MP3/JPEG Disc PlaybackPress ¢ / 4 repeatedly as many times as required Press DVD 3 or Enter Operations through the MP3/JPEG Control ScreensPress cursor ∞/5 repeatedly to select a group Press Repeat during or before playPlaying Back the Entire MD Normal Play Playing Back an MDBasic MD Operations Recording length mode To go to another track directly using the number buttonsWhile playing or pausing To change the information shown on the displayPress the number buttons to select the tracks To check the program contentsLoad an MD Repeat to program other tracks you wantLoad an MD including groups Playing Tracks in a Group-Group PlayPress GROUP/TITLE I or GROUP/TITLE I to select a group Enter the characters to search for the track title Press Title SearchPress Repeat repeatedly during or before play MD Repeat ALLTo prohibit MD ejection-MD Lock Press REV.MODE Playing Back a TapePlaying Back a Tape Press Tape 2Listening to External Equipment Turn down the volume level to Volume MINListening to External Equipment Press AUXAbout the track marks Recording on an MDBefore You Start Recording on an MD To avoid erasing important recordingsPress LP Setting MD Recording ModesPress Group REC ON/OFF Recording discs onto an MD Disc-MD Synchronized Recording Press CD REC Mode to select the recording modeWhen recording from a CD-R/RW Press REC Speed to select the recording speed you wantPrepare the source to record from Recording Other Sources onto an MDTo record a single track during play or pause REC MD recording indicator starts flashing On the display Press TR. Mark Select to select track mark entry modeManual Mark Time Auto Mark To protect your recordings Recording on a TapeBefore You Start Recording on a Tape To keep the best recording and playback sound qualityRecording onto a Tape Press Tape RECRecording Disc onto a Tape Disc-Tape Synchronized Recording Press REV.MODE to select a reverse modeWhen recording a disc or an MD To record from the desired trackRecording Discs onto an MD and a Tape MD and tape Elapsed Recording indicatorsWhen recording on an MD and a tape at the same time Disc Synchronized RecordingEditing an MD Using MD Groups as a separate itemHow to make up Groups Guidance-MD Group FunctionsGroup Introducing Group Editing Functions13 14 Insert an MD you want to edit into the MD loading slot When Cannot FORM! appears on the display in stepForming a Group-FORM GR During playbackPress UP ¢ or Down 4 to select the track When Cannot ENTRY! appears on the display in stepAdding a Track to a Group-ENTRY GR Press GROUP/TITLE I or GROUP/TITLE I to select the groupEx. When track 18 is selected Dividing a Group-DIVIDE GREx. When groups 7 and 8 are selected When Cannot Join appears on the display in stepJoining Two Groups-JOIN GR Ex. When group 3 is moved to group Ex. When group 3 is selectedMoving a Group-MOVE GR Insert an MD you want to edit into the MD Ungrouping Tracks-UNGROUPDissolving All Groups-UNGR ALL Loading slotEx. When group 6 is selected Erasing Tracks in a Group-ERASE GRIntroducing Track Editing Functions Dividing a Track-DIVIDE Ex. When adjusting the point byEx. When track 12 is selected Press UP ¢ or Down 4 to select the track you want to divideEx. When tracks 2 and 3 are selected Joining Two Tracks-JOINMoving a Track-MOVE Ex. When track 3 is moved to trackPress UP ¢ or Down 4 to select the track you want to move You can select up to 15 tracks Erasing Tracks-ERASEErasing All Tracks-ALL Erase Appears on the display Track marked with Will be erasedAssigning Titles to an MD Enter the unit into the title entry modePress UP ¢ or Down 4 to change the title entry mode Press Title EditPress Enter to finish the current title entry Press Cancel to exit from the title entry modeEnter characters Press 0 MD eject on the unit to ejectYou can make a correction or change the title To Change the TitleYou can assign titles during play or recording Make sure that the character you want to change is flashingSet the shut-off time Using the TimersUsing Recording Timer Set the start timeSelect the device to record onto To turn off the Recording Timer after its setting is doneTo turn on the Recording Timer again MD REC Tape RECHow Daily Timer actually works Using Daily TimerSelect the source to play back Adjust the volume level Select the fade settingHow Sleep Timer actually works Using Sleep TimerTimer Priority Press Sleep repeatedlyIntroducing the Choice Menus Initial Setting Using Choice MenuConfiguration of the choice menus Operation buttonsPress Choice Operating ProcedurePress Enter to finish the setting Press cursor 3/2 repeatedly to display the Picture menuPicture setting menu-PICTURE Language selection menu-LANGUAGEOther setting menu-OTHERS Dynamic Range CompressionSetting Parental Lock Restricting the Access Level-Parental LockRemember your password or make a note of it Releasing Parental Lock temporarily Changing the Parental Lock settingWhen you enter wrong password three times To return to Others menuCountry/Area codes list for Parental Lock Operating Other Manufacturers’ TV Changing the Preset Signal CodesSet the AUDIO-TV switch to TV Press and hold TV Release TV Press TV to operate your TVAV Compu Link connection Using AV Compu Link Control SystemConnection diagram Available operationsGlossary General Notes MaintenanceCleaning the unit Handling discsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC31st Generation Language Code ListScms Serial Copy Management System MD limitationsDisc/MD Messages Output Signals through the DVD Optical Digital OUT TerminalCD with DTS Digital Surround MP3 disc Output Signals For DiscFor MD X1 onlyTroubleshooting SymptomCassette deck Section Supplied accessoriesTuner Section GeneralEN, CS Victor Company of JAPAN, Limited 1203AIMMDWJEM
Top Page Image Contents