JVC UX-J99DVD Listening to External Equipment, Press AUX, Start playing the external equipment

Page 47

Listening to External Equipment

English

Listening to External Equipment

You can listen to external equipment connected to the AUX jacks and OPTICAL DIGITAL IN terminal on the rear of the unit.

First make sure that the external equipment is properly connected as follows (see also “Connecting Other Equipment” on page 9):

DO NOT connect other equipment while the power is on.

To OPTICAL DIGITAL

IN terminal

 

To digital audio

 

 

 

AUDIO

 

output

PCM

OPTICAL

 

 

DIGITAL

External equipment

 

IN

 

 

PCM/

DVD OPTICAL

 

STREAM

DIGITAL

To audio output

 

OUT

RIGHT

LEFT

To AUX jacks

1 On the remote control:

Press FM/AM/AUX repeatedly until “AUX” (for AUX jacks) or “AUX- DIGITAL” (for OPTICAL DIGITAL IN terminal) appears on the display.

Each time you press the button, the source changes as follows:

4 Adjust the volume level to your desired listening level.

5 Apply sound effects, if you wish.

• For how to apply sound effects, see pages 11 and 12.

To adjust the Audio Input Level

If the sound from the component connected to the AUX jacks is too loud or is not loud enough when changing from another source to “AUX,” you can change the audio input level through the AUX jacks (without changing the volume level).

On the remote control ONLY:

Press and hold SET for more than 2 seconds while the source is “AUX.”

Each time you press and hold the button, the audio input level alternates between “LEVEL 1” and “LEVEL 2.”

LEVEL 1: Select this when the sound is too loud (initial setting).

LEVEL 2: Select this when the sound is not loud enough.

To change the information shown on the display

On the remote control ONLY:

Press DISP/CHARA.

Each time you press the button, the information on the display alternates between the source indication and the clock indication.

FM AM

AUX-DIGITAL AUX

On the unit:

Press AUX.

• Each time you press the button, the source

AUX

 

alternates between “AUX” and “AUX-DIGITAL”

FM/AM

on the display.

 

2 Turn down the volume level to “VOLUME MIN.”

VOLUME +

(On the remote control)

(On the unit)

3 Start playing the external equipment.

For operation of the external equipment, refer to the manuals supplied with it.

44

Image 47
Contents UX-J99DVD Page Important for Laser Products About This Manual PrecautionsIntroduction Contents Become familiar with the buttons and controls on your unit Remote ControlRemote Control Location of the Buttons and ControlsDisc trays compartment-5-DVD changer Front PanelFront panel Display window Group indicatorReverse mode indicator Display window on the front panelAttach the FM antenna to the FM 75 Ω Coaxial terminal Connecting AntennasGetting Started UnpackingTo connect an outdoor AM antenna Connecting SpeakersTo connect an outdoor FM antenna AM antennaTo remove the speaker grilles Connecting a TVRelease your finger from the clamp To connect analog audio equipment Connecting Other EquipmentColor system of TV Color system setting To select the color systemBasic and Common Operations Setting the ClockTurning On the Power and Starting Playback Press Fade Muting Adjusting the Volume LevelTo turn down the volume level temporarily Reinforcing the Bass SoundPress Dimmer while the unit is turned on Adjusting the ToneChanging the Scanning Mode Changing the Display BrightnessListening to FM and AM Broadcasts Setting the AM Tuner Interval SpacingTuning in to a Preset Station Presetting StationsAbout copy protection Playing Back Discs on the 5-DVD ChangerDisc Information Playable disc typesPlayback Control function PBC-SVCD and VCD only Disc structureLoad discs into the 5-DVD changer Loading DiscsPlaying Back All the Discs-Continuous Play Press ¢ or 4 during playback Basic Disc OperationsPress GROUP/TITLE I or GROUP/TITLE I during playback Press DISP/CHARA Using the number buttonsPress ¡ or Press ¢ or 4 repeatedlyPress TOP Menu or Menu Playing Back by Using the Disc MenuWhen playing a DVD When playing a Svcd or VCDPress DVD Programing the Track Playing Order Program PlayPress the number buttons to select a disc tray Program other tracks you wantTo modify the program To check the programed contentsPlaying at Random-Random Play To exit from Program PlayTo exit from Random Play Repeating Playback-Repeat PlayProhibiting Disc Ejection-Disc Lock Press RepeatIndication Meanings Available discs Advanced Disc OperationsAbout the On-screen Bar Press on ScreenOn-screen guide icons Operation through the On-screen BarPress on Screen twice Press EnterTo repeat a current title, group, chapter, or all tracks Press cursor ∞/5 repeatedly to select Repeat Play modeRepeating Playback While playing back a DVD Press cursor ∞/5 repeatedly to select A-BTo repeat a desired portion-A-B Repeat Locating a desired position-Time SearchUnit starts playback from the specified time Ex. When playing a DVD AudioLocating a desired chapter/track To correct a misentryPress Audio repeatedly to select the desired audio language Selecting the Audio LanguageSelecting the Subtitle Language Press AudioPress Angle repeatedly to select the desired view angle Selecting a View AngleSelecting Browsable Still Pictures recorded on Press AngleST 1/ST Press Virtual SurroundPress Audio repeatedly to select the desired audio channel Ex. ST 1 ST 2 L 1 R 1 L 2 RPress Slow 9 ¡ or Special Picture PlaybackPress 8 once Press 8 repeatedlyPress VFP Changing the VFP SettingPress cursor 3/2 repeatedly to select the VFP mode Repeat steps 2 to 4 to adjust other parametersOn the display On the TV screen Playing Back a Bonus GroupSelect a bonus group While the key number entry indication appearsPress ¢ / 4 repeatedly as many times as required MP3/JPEG Disc PlaybackPress DVD 8 or #¥8 DVD on the unit Press Repeat during or before play Operations through the MP3/JPEG Control ScreensPress cursor ∞/5 repeatedly to select a group Press DVD 3 or EnterBasic MD Operations Playing Back an MDPlaying Back the Entire MD Normal Play To change the information shown on the display To go to another track directly using the number buttonsWhile playing or pausing Recording length modeRepeat to program other tracks you want To check the program contentsLoad an MD Press the number buttons to select the tracksPress GROUP/TITLE I or GROUP/TITLE I to select a group Playing Tracks in a Group-Group PlayLoad an MD including groups MD Repeat ALL Press Title SearchPress Repeat repeatedly during or before play Enter the characters to search for the track titleTo prohibit MD ejection-MD Lock Press Tape 2 Playing Back a TapePlaying Back a Tape Press REV.MODEPress AUX Turn down the volume level to Volume MINListening to External Equipment Listening to External EquipmentTo avoid erasing important recordings Recording on an MDBefore You Start Recording on an MD About the track marksPress Group REC ON/OFF Setting MD Recording ModesPress LP Press REC Speed to select the recording speed you want Press CD REC Mode to select the recording modeWhen recording from a CD-R/RW Recording discs onto an MD Disc-MD Synchronized RecordingTo record a single track during play or pause Recording Other Sources onto an MDPrepare the source to record from Manual Mark Time Auto Mark Press TR. Mark Select to select track mark entry modeREC MD recording indicator starts flashing On the display To keep the best recording and playback sound quality Recording on a TapeBefore You Start Recording on a Tape To protect your recordingsPress Tape REC Recording onto a TapeTo record from the desired track Press REV.MODE to select a reverse modeWhen recording a disc or an MD Recording Disc onto a Tape Disc-Tape Synchronized RecordingDisc Synchronized Recording MD and tape Elapsed Recording indicatorsWhen recording on an MD and a tape at the same time Recording Discs onto an MD and a TapeGuidance-MD Group Functions Using MD Groups as a separate itemHow to make up Groups Editing an MD13 14 Introducing Group Editing FunctionsGroup During playback When Cannot FORM! appears on the display in stepForming a Group-FORM GR Insert an MD you want to edit into the MD loading slotPress GROUP/TITLE I or GROUP/TITLE I to select the group When Cannot ENTRY! appears on the display in stepAdding a Track to a Group-ENTRY GR Press UP ¢ or Down 4 to select the trackDividing a Group-DIVIDE GR Ex. When track 18 is selectedJoining Two Groups-JOIN GR When Cannot Join appears on the display in stepEx. When groups 7 and 8 are selected Moving a Group-MOVE GR Ex. When group 3 is selectedEx. When group 3 is moved to group Loading slot Ungrouping Tracks-UNGROUPDissolving All Groups-UNGR ALL Insert an MD you want to edit into the MDErasing Tracks in a Group-ERASE GR Ex. When group 6 is selectedIntroducing Track Editing Functions Press UP ¢ or Down 4 to select the track you want to divide Ex. When adjusting the point byEx. When track 12 is selected Dividing a Track-DIVIDEJoining Two Tracks-JOIN Ex. When tracks 2 and 3 are selectedPress UP ¢ or Down 4 to select the track you want to move Ex. When track 3 is moved to trackMoving a Track-MOVE Appears on the display Track marked with Will be erased Erasing Tracks-ERASEErasing All Tracks-ALL Erase You can select up to 15 tracksPress Title Edit Enter the unit into the title entry modePress UP ¢ or Down 4 to change the title entry mode Assigning Titles to an MDPress 0 MD eject on the unit to eject Press Cancel to exit from the title entry modeEnter characters Press Enter to finish the current title entryMake sure that the character you want to change is flashing To Change the TitleYou can assign titles during play or recording You can make a correction or change the titleSet the start time Using the TimersUsing Recording Timer Set the shut-off timeMD REC Tape REC To turn off the Recording Timer after its setting is doneTo turn on the Recording Timer again Select the device to record ontoSelect the source to play back Using Daily TimerHow Daily Timer actually works Select the fade setting Adjust the volume levelPress Sleep repeatedly Using Sleep TimerTimer Priority How Sleep Timer actually worksOperation buttons Initial Setting Using Choice MenuConfiguration of the choice menus Introducing the Choice MenusPress cursor 3/2 repeatedly to display the Picture menu Operating ProcedurePress Enter to finish the setting Press ChoiceLanguage selection menu-LANGUAGE Picture setting menu-PICTUREDynamic Range Compression Other setting menu-OTHERSRemember your password or make a note of it Restricting the Access Level-Parental LockSetting Parental Lock To return to Others menu Changing the Parental Lock settingWhen you enter wrong password three times Releasing Parental Lock temporarilyCountry/Area codes list for Parental Lock Release TV Press TV to operate your TV Changing the Preset Signal CodesSet the AUDIO-TV switch to TV Press and hold TV Operating Other Manufacturers’ TVAvailable operations Using AV Compu Link Control SystemConnection diagram AV Compu Link connectionGlossary Handling discs MaintenanceCleaning the unit General NotesAtrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc TypesMD limitations Language Code ListScms Serial Copy Management System 1st GenerationFor Disc Output Signals through the DVD Optical Digital OUT TerminalCD with DTS Digital Surround MP3 disc Output Signals Disc/MD MessagesX1 only For MDSymptom TroubleshootingGeneral Supplied accessoriesTuner Section Cassette deck SectionEN, CS Victor Company of JAPAN, Limited 1203AIMMDWJEM