Dividing a Group—DIVIDE GR
This function allows you to divide one group into two separate groups.
You cannot divide the group containing only a single track. When the original group has a title, two separate groups are reassigned the same title as the original group.
Once a new group is divided, the other groups are renumbered.
•To stop any time during the editing process below before step 7, press GROUP TITLE EDIT.
1 Insert an MD you want to edit into the MD loading slot.
On the remote control ONLY:
2 Press GROUP TITLE EDIT repeatedly until “DIVIDE GR?” appears on the display.
English
5 Press UP ¢ or DOWN 4 to select the track as the dividing point.
The track selected in this step will be the first track in the divided group.
•You can also select the track using the number buttons. In this case, the selected track starts playback repeatedly.
Ex.: When track 18 is selected.
•You cannot select the first track in a group or an ungrouped track as a dividing point.
6 Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4.
• If you want to stop this editing process, press CANCEL.
3 Press SET.
•If the loaded MD has no group, you cannot go to the following steps.
•During playback:
The current playing track number and its group number will appear. If the track does not belong to any group, the group number will be indicated as “–
4 Press GROUP/TITLE >>I or GROUP/TITLE I<< to select the group you want to divide.
The first track of the selected group
Ex.: When group 2 is selected.
7 Press ENTER.
“EDITING” appears and the REC (MD recording) indicator flashes on the display. Then “WRITING” flashes while editing you have made is being recorded on the MD.
To join the divided groups, see the JOIN GR function on page 59.
58