JVC UX-J99DVD Using the Timers, Using Recording Timer, Set the shut-off time, Set the start time

English

Using the Timers

There are three timers available—Recording Timer, Daily Timer and		(3) Press cursor 3/2 repeatedly to adjust
Sleep Timer.		the minute.
• Before using these timers, make sure the built-in clock is set		REC
correctly (see page 10).
• When using the tuner as the source, preset stations in advance (see
page 14).
Using Recording Timer		Ex.: When you set start time to 11:30.
		(4) Press SET.
With Recording Timer, you can make an unattended recording.
• You can set Recording Timer whether the unit is turned on or off		The hour digits of the shut-off time start flashing.
(on standby).	3 Set the shut-off time.
• To correct a mis-entry any time during the setting process, press
CANCEL.		(1) Press cursor 3/2 repeatedly to
• To exit from the timer setting during the process, press CLOCK/		adjust the hour.
TIMER repeatedly until the source indication appears.
How Recording Timer actually works
The unit automatically turns on, muting the volume, and starts		(2) Press SET.
recording on the MD or on the tape when the start time comes.		The minute digits start flashing.
Then, when the shut-off time comes, the unit automatically turns off		(3) Press cursor 3/2 repeatedly to
(on standby).
		adjust the minute.
Recording Timer works only once, but the timer settings remain
stored in memory until you reset them or unplug the AC power cord.		REC
On the remote control ONLY:
1 Press CLOCK/TIMER repeatedly until
“REC TIMER” appears on the display.
The (timer) indicator lights up and the REC (recording timer)		Ex.: When you set shut-off time to 13:00.
indicator starts flashing on the display.
		(4) Press SET.
REC		The source name flashes on the display.

•Each time you press the button, the timer changes as follows:

	REC TIMER		REC TIMER		DAILY TIMER
(Recording Timer on/off)		(Recording Timer setting)				(Daily Timer on/off)
Source indication*				Clock setting		DAILY TIMER
	(canceled)					(Daily Timer setting)

*Source indication appears only when the unit is turned on. The hour digits of the start time start flashing.

2 Set the start time.

(1) Press cursor 3/2 repeatedly to adjust the hour.

(2) Press SET.

The minute digits start flashing.

4 Select the source to record from.

(1) Press cursor 3/2 repeatedly to select the source.

•Each time you press the button, the

source changes as follows:

FM AM AUX

AUX-DIGITAL

(2)When you select “FM” or “AM,” press SET, then select a preset number by pressing cursor 3/2.

•If you select “FM – –” or “AM – –,” the station is set to the last tuned station.

When you select “AUX” or “AUX-DIGITAL,” set the

timer function of the external component as well.

(3) Press SET.

A device to record onto flashes on the display.

71