JVC UX-J99DVD manual To Change the Title, You can assign titles during play or recording

Page 73

You can assign titles during play or recording

•During play: Entering a track title

The MD recorder repeats playback of the current track until you press ENTER in step 6. When you press ENTER, the next track will be played.

Entering a disc title

The MD recorder repeats playback of all tracks of the MD until you press ENTER in step 6. When you press ENTER, the MD recorder enters the track title entry mode.

Entering a group title

The MD recorder repeats playback of the tracks in the group until you press ENTER in step 6. When you press ENTER, the MD recorder enters the next group title entry mode.

•During recording: Entering a track title

The MD recorder continues recording even after you press ENTER in step 6. When you press ENTER, a track title is assigned to the track where you have started the title entry. If you do not press ENTER before recording ends, the track title assigned will be canceled.

•During Disc-MD or Disc-Tape Synchronized Recording (see pages 47,

48 and 52):

You can assign the disc title, and 16 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. “EDITING” appears on the display for a while, then the next title entry screen appears. If you enter 17th track title or more, they are ignored.

When you unplug the AC power cord or if a power failure occurs before step 8

The editing you have made is not recorded on the MD.

English

To Change the Title

You can make a correction or change the title.

1 Follow steps 1 to 4 on page 68.

2 Select the character you want to correct, by pressing UP ¢ or DOWN 4.

•Make sure that the character you want to change is flashing.

3 Press CANCEL to delete the character you have selected in the above step.

4 Enter the correct character, referring to step 5 on page 69.

5 Repeat steps 2 to 4 of the current procedure to correct more characters.

6 Press ENTER to finish correcting the title.

“EDITING” appears on the display for a while, then the next title entry screen appears.

•If you want to correct another title, select another title entry mode by pressing UP ¢ or DOWN 4, press SET, then repeat from step 2 above.

•If you want to finish the correction, go to the next step.

7

Press 0 (MD eject) on the unit to eject

0

 

 

the MD.

 

 

 

 

 

 

‹/8

 

 

“WRITING” and the REC (MD recording)

 

 

MD

 

 

indicator flash while the editing you have made is

 

 

 

being recorded on the MD.

 

 

 

 

 

To erase all the characters, press CANCEL repeatedly in step 3 above to erase all the characters, then go to step 6.

70

Page 72 Page 74
Image 73
Page 72 Page 74
Contents UX-J99DVD Page Important for Laser Products Introduction PrecautionsAbout This Manual Contents Remote Control Remote ControlLocation of the Buttons and Controls Become familiar with the buttons and controls on your unitFront panel Front PanelDisc trays compartment-5-DVD changer Reverse mode indicator Group indicatorDisplay window on the front panel Display windowGetting Started Connecting AntennasUnpacking Attach the FM antenna to the FM 75 Ω Coaxial terminalTo connect an outdoor FM antenna Connecting SpeakersAM antenna To connect an outdoor AM antennaRelease your finger from the clamp Connecting a TVTo remove the speaker grilles Color system of TV Color system setting Connecting Other EquipmentTo select the color system To connect analog audio equipmentTurning On the Power and Starting Playback Setting the ClockBasic and Common Operations To turn down the volume level temporarily Adjusting the Volume LevelReinforcing the Bass Sound Press Fade MutingChanging the Scanning Mode Adjusting the ToneChanging the Display Brightness Press Dimmer while the unit is turned onListening to FM and AM Broadcasts Setting the AM Tuner Interval SpacingTuning in to a Preset Station Presetting StationsDisc Information Playing Back Discs on the 5-DVD ChangerPlayable disc types About copy protectionPlayback Control function PBC-SVCD and VCD only Disc structurePlaying Back All the Discs-Continuous Play Loading DiscsLoad discs into the 5-DVD changer Press GROUP/TITLE I or GROUP/TITLE I during playback Basic Disc OperationsPress ¢ or 4 during playback Press ¡ or Using the number buttonsPress ¢ or 4 repeatedly Press DISP/CHARAWhen playing a DVD Playing Back by Using the Disc MenuWhen playing a Svcd or VCD Press TOP Menu or MenuPress the number buttons to select a disc tray Programing the Track Playing Order Program PlayProgram other tracks you want Press DVDPlaying at Random-Random Play To check the programed contentsTo exit from Program Play To modify the programProhibiting Disc Ejection-Disc Lock Repeating Playback-Repeat PlayPress Repeat To exit from Random PlayAbout the On-screen Bar Advanced Disc OperationsPress on Screen Indication Meanings Available discsPress on Screen twice Operation through the On-screen BarPress Enter On-screen guide iconsRepeating Playback Press cursor ∞/5 repeatedly to select Repeat Play modeTo repeat a current title, group, chapter, or all tracks To repeat a desired portion-A-B Repeat Press cursor ∞/5 repeatedly to select A-BLocating a desired position-Time Search While playing back a DVDLocating a desired chapter/track Ex. When playing a DVD AudioTo correct a misentry Unit starts playback from the specified timeSelecting the Subtitle Language Selecting the Audio LanguagePress Audio Press Audio repeatedly to select the desired audio languageSelecting Browsable Still Pictures recorded on Selecting a View AnglePress Angle Press Angle repeatedly to select the desired view anglePress Audio repeatedly to select the desired audio channel Press Virtual SurroundEx. ST 1 ST 2 L 1 R 1 L 2 R ST 1/STPress 8 once Special Picture PlaybackPress 8 repeatedly Press Slow 9 ¡ orPress cursor 3/2 repeatedly to select the VFP mode Changing the VFP SettingRepeat steps 2 to 4 to adjust other parameters Press VFPSelect a bonus group Playing Back a Bonus GroupWhile the key number entry indication appears On the display On the TV screenPress DVD 8 or #¥8 DVD on the unit MP3/JPEG Disc PlaybackPress ¢ / 4 repeatedly as many times as required Press cursor ∞/5 repeatedly to select a group Operations through the MP3/JPEG Control ScreensPress DVD 3 or Enter Press Repeat during or before playPlaying Back the Entire MD Normal Play Playing Back an MDBasic MD Operations While playing or pausing To go to another track directly using the number buttonsRecording length mode To change the information shown on the displayLoad an MD To check the program contentsPress the number buttons to select the tracks Repeat to program other tracks you wantLoad an MD including groups Playing Tracks in a Group-Group PlayPress GROUP/TITLE I or GROUP/TITLE I to select a group Press Repeat repeatedly during or before play Press Title SearchEnter the characters to search for the track title MD Repeat ALLTo prohibit MD ejection-MD Lock Playing Back a Tape Playing Back a TapePress REV.MODE Press Tape 2Listening to External Equipment Turn down the volume level to Volume MINListening to External Equipment Press AUXBefore You Start Recording on an MD Recording on an MDAbout the track marks To avoid erasing important recordingsPress LP Setting MD Recording ModesPress Group REC ON/OFF When recording from a CD-R/RW Press CD REC Mode to select the recording modeRecording discs onto an MD Disc-MD Synchronized Recording Press REC Speed to select the recording speed you wantPrepare the source to record from Recording Other Sources onto an MDTo record a single track during play or pause REC MD recording indicator starts flashing On the display Press TR. Mark Select to select track mark entry modeManual Mark Time Auto Mark Before You Start Recording on a Tape Recording on a TapeTo protect your recordings To keep the best recording and playback sound qualityPress Tape REC Recording onto a TapeWhen recording a disc or an MD Press REV.MODE to select a reverse modeRecording Disc onto a Tape Disc-Tape Synchronized Recording To record from the desired trackWhen recording on an MD and a tape at the same time MD and tape Elapsed Recording indicatorsRecording Discs onto an MD and a Tape Disc Synchronized RecordingHow to make up Groups Using MD Groups as a separate itemEditing an MD Guidance-MD Group FunctionsGroup Introducing Group Editing Functions13 14 Forming a Group-FORM GR When Cannot FORM! appears on the display in stepInsert an MD you want to edit into the MD loading slot During playbackAdding a Track to a Group-ENTRY GR When Cannot ENTRY! appears on the display in stepPress UP ¢ or Down 4 to select the track Press GROUP/TITLE I or GROUP/TITLE I to select the groupDividing a Group-DIVIDE GR Ex. When track 18 is selectedEx. When groups 7 and 8 are selected When Cannot Join appears on the display in stepJoining Two Groups-JOIN GR Ex. When group 3 is moved to group Ex. When group 3 is selectedMoving a Group-MOVE GR Dissolving All Groups-UNGR ALL Ungrouping Tracks-UNGROUPInsert an MD you want to edit into the MD Loading slotErasing Tracks in a Group-ERASE GR Ex. When group 6 is selectedIntroducing Track Editing Functions Ex. When track 12 is selected Ex. When adjusting the point byDividing a Track-DIVIDE Press UP ¢ or Down 4 to select the track you want to divideJoining Two Tracks-JOIN Ex. When tracks 2 and 3 are selectedMoving a Track-MOVE Ex. When track 3 is moved to trackPress UP ¢ or Down 4 to select the track you want to move Erasing All Tracks-ALL Erase Erasing Tracks-ERASEYou can select up to 15 tracks Appears on the display Track marked with Will be erasedPress UP ¢ or Down 4 to change the title entry mode Enter the unit into the title entry modeAssigning Titles to an MD Press Title EditEnter characters Press Cancel to exit from the title entry modePress Enter to finish the current title entry Press 0 MD eject on the unit to ejectYou can assign titles during play or recording To Change the TitleYou can make a correction or change the title Make sure that the character you want to change is flashingUsing Recording Timer Using the TimersSet the shut-off time Set the start timeTo turn on the Recording Timer again To turn off the Recording Timer after its setting is doneSelect the device to record onto MD REC Tape RECHow Daily Timer actually works Using Daily TimerSelect the source to play back Select the fade setting Adjust the volume levelTimer Priority Using Sleep TimerHow Sleep Timer actually works Press Sleep repeatedlyConfiguration of the choice menus Initial Setting Using Choice MenuIntroducing the Choice Menus Operation buttonsPress Enter to finish the setting Operating ProcedurePress Choice Press cursor 3/2 repeatedly to display the Picture menuLanguage selection menu-LANGUAGE Picture setting menu-PICTUREDynamic Range Compression Other setting menu-OTHERSSetting Parental Lock Restricting the Access Level-Parental LockRemember your password or make a note of it When you enter wrong password three times Changing the Parental Lock settingReleasing Parental Lock temporarily To return to Others menuCountry/Area codes list for Parental Lock Set the AUDIO-TV switch to TV Press and hold TV Changing the Preset Signal CodesOperating Other Manufacturers’ TV Release TV Press TV to operate your TVConnection diagram Using AV Compu Link Control SystemAV Compu Link connection Available operationsGlossary Cleaning the unit MaintenanceGeneral Notes Handling discsAdditional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Language Code List1st Generation MD limitationsCD with DTS Digital Surround MP3 disc Output Signals Output Signals through the DVD Optical Digital OUT TerminalDisc/MD Messages For DiscX1 only For MDSymptom TroubleshootingTuner Section Supplied accessoriesCassette deck Section GeneralEN, CS Victor Company of JAPAN, Limited 1203AIMMDWJEM
Top Page Image Contents