JVC UX-J99DVD Using AV Compu Link Control System, AV Compu Link connection, Available operations

Page 87

Using AV COMPU LINK Control System

English

The AV COMPU LINK control system allows you to use JVC’s TV with simple operations.

To use AV COMPU LINK control system, you need to connect this unit and a TV through the AV COMPU LINK terminals.

•You can connect to a TV that has AV COMPU LINK II, AV COMPU LINK III or AV COMPU LINK EX terminals.

AV COMPU LINK connection

Connect a TV by using a video cord (see page 8) then also connect it by using a cord with monaural mini-plugs (not supplied).

•You need to set “AV COMPU LINK MODE” correctly to use AV COMPU LINK control system. (See page 79.)

Set the “AV COMPU LINK MODE” to

•“DVD1” when you connect this unit to the COMPONENT VIDEO (or VIDEO-3) terminals on a TV using a component video cord (not supplied).

•“DVD2” when you connect this unit to the VIDEO-1 terminals on a TV using an S-video cord (not supplied).

•“DVD3” when you connect this unit to the VIDEO-2 terminals on a TV using a composite video cord (supplied).

Available operations

You can use following functions by using AV COMPU LINK control system.

One-touch DVD play

Simply start playing back the unit, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

•The TV does not turn off automatically even if you turn off the unit.

When the main power of the TV is turned off or the power cord of the TV is unplugged

You cannot use the one-touch play.

Connection diagram
					Component video cord (not supplied): Select “DVD1.”
				COMPONENT
				PR	PB	Y
							Composite video cord (supplied):
				S-VIDEO	VIDEO	VIDEO	Select “DVD3.”
						VIDEO
						OUT
AUDIO		COMPONENT		ANTENNA
PCM	OPTICAL	PR	PB	Y
	DIGITAL
	IN
PCM/	DVD OPTICAL	S-VIDEO	VIDEO	VIDEO
STREAM	DIGITAL			VIDEO
	OUT			OUT
RIGHT	LEFT						S-video cord (not supplied):
					AV		S-video cord (not supplied):
					AV		Select “DVD2.”
SPEAKER	SPEAKERS			COMPU LINK
SPEAKER
IMPEDANCE
4Ω ~ 16Ω		AV
		COMPU LINK
		NTSC
		PAL
RIGHT LEFT		VIDEO OUT						TV
		SELECT

								AV
								COMPU LINK II
						Cord with monaural mini-plugs		AV
								COMPU LINK EX

						(not supplied)
								84

Image 87

Contents UX-J99DVD Page Important for Laser Products Precautions IntroductionAbout This Manual Contents Become familiar with the buttons and controls on your unit Remote ControlRemote Control Location of the Buttons and ControlsFront Panel Front panelDisc trays compartment-5-DVD changer Display window Group indicatorReverse mode indicator Display window on the front panelAttach the FM antenna to the FM 75 Ω Coaxial terminal Connecting AntennasGetting Started UnpackingTo connect an outdoor AM antenna Connecting SpeakersTo connect an outdoor FM antenna AM antennaConnecting a TV Release your finger from the clampTo remove the speaker grilles To connect analog audio equipment Connecting Other EquipmentColor system of TV Color system setting To select the color systemSetting the Clock Turning On the Power and Starting PlaybackBasic and Common Operations Press Fade Muting Adjusting the Volume LevelTo turn down the volume level temporarily Reinforcing the Bass SoundPress Dimmer while the unit is turned on Adjusting the ToneChanging the Scanning Mode Changing the Display BrightnessListening to FM and AM Broadcasts Setting the AM Tuner Interval SpacingTuning in to a Preset Station Presetting StationsAbout copy protection Playing Back Discs on the 5-DVD ChangerDisc Information Playable disc typesPlayback Control function PBC-SVCD and VCD only Disc structureLoading Discs Playing Back All the Discs-Continuous PlayLoad discs into the 5-DVD changer Basic Disc Operations Press GROUP/TITLE I or GROUP/TITLE I during playbackPress ¢ or 4 during playback Press DISP/CHARA Using the number buttonsPress ¡ or Press ¢ or 4 repeatedlyPress TOP Menu or Menu Playing Back by Using the Disc MenuWhen playing a DVD When playing a Svcd or VCDPress DVD Programing the Track Playing Order Program PlayPress the number buttons to select a disc tray Program other tracks you wantTo modify the program To check the programed contentsPlaying at Random-Random Play To exit from Program PlayTo exit from Random Play Repeating Playback-Repeat PlayProhibiting Disc Ejection-Disc Lock Press RepeatIndication Meanings Available discs Advanced Disc OperationsAbout the On-screen Bar Press on ScreenOn-screen guide icons Operation through the On-screen BarPress on Screen twice Press EnterPress cursor ∞/5 repeatedly to select Repeat Play mode Repeating PlaybackTo repeat a current title, group, chapter, or all tracks While playing back a DVD Press cursor ∞/5 repeatedly to select A-BTo repeat a desired portion-A-B Repeat Locating a desired position-Time SearchUnit starts playback from the specified time Ex. When playing a DVD AudioLocating a desired chapter/track To correct a misentryPress Audio repeatedly to select the desired audio language Selecting the Audio LanguageSelecting the Subtitle Language Press AudioPress Angle repeatedly to select the desired view angle Selecting a View AngleSelecting Browsable Still Pictures recorded on Press AngleST 1/ST Press Virtual SurroundPress Audio repeatedly to select the desired audio channel Ex. ST 1 ST 2 L 1 R 1 L 2 RPress Slow 9 ¡ or Special Picture PlaybackPress 8 once Press 8 repeatedlyPress VFP Changing the VFP SettingPress cursor 3/2 repeatedly to select the VFP mode Repeat steps 2 to 4 to adjust other parametersOn the display On the TV screen Playing Back a Bonus GroupSelect a bonus group While the key number entry indication appearsMP3/JPEG Disc Playback Press DVD 8 or #¥8 DVD on the unitPress ¢ / 4 repeatedly as many times as required Press Repeat during or before play Operations through the MP3/JPEG Control ScreensPress cursor ∞/5 repeatedly to select a group Press DVD 3 or EnterPlaying Back an MD Playing Back the Entire MD Normal PlayBasic MD Operations To change the information shown on the display To go to another track directly using the number buttonsWhile playing or pausing Recording length modeRepeat to program other tracks you want To check the program contentsLoad an MD Press the number buttons to select the tracksPlaying Tracks in a Group-Group Play Load an MD including groupsPress GROUP/TITLE I or GROUP/TITLE I to select a group MD Repeat ALL Press Title SearchPress Repeat repeatedly during or before play Enter the characters to search for the track titleTo prohibit MD ejection-MD Lock Press Tape 2 Playing Back a TapePlaying Back a Tape Press REV.MODEPress AUX Turn down the volume level to Volume MINListening to External Equipment Listening to External EquipmentTo avoid erasing important recordings Recording on an MDBefore You Start Recording on an MD About the track marksSetting MD Recording Modes Press LPPress Group REC ON/OFF Press REC Speed to select the recording speed you want Press CD REC Mode to select the recording modeWhen recording from a CD-R/RW Recording discs onto an MD Disc-MD Synchronized RecordingRecording Other Sources onto an MD Prepare the source to record fromTo record a single track during play or pause Press TR. Mark Select to select track mark entry mode REC MD recording indicator starts flashing On the displayManual Mark Time Auto Mark To keep the best recording and playback sound quality Recording on a TapeBefore You Start Recording on a Tape To protect your recordingsPress Tape REC Recording onto a TapeTo record from the desired track Press REV.MODE to select a reverse modeWhen recording a disc or an MD Recording Disc onto a Tape Disc-Tape Synchronized RecordingDisc Synchronized Recording MD and tape Elapsed Recording indicatorsWhen recording on an MD and a tape at the same time Recording Discs onto an MD and a TapeGuidance-MD Group Functions Using MD Groups as a separate itemHow to make up Groups Editing an MDIntroducing Group Editing Functions Group13 14 During playback When Cannot FORM! appears on the display in stepForming a Group-FORM GR Insert an MD you want to edit into the MD loading slotPress GROUP/TITLE I or GROUP/TITLE I to select the group When Cannot ENTRY! appears on the display in stepAdding a Track to a Group-ENTRY GR Press UP ¢ or Down 4 to select the trackDividing a Group-DIVIDE GR Ex. When track 18 is selectedWhen Cannot Join appears on the display in step Ex. When groups 7 and 8 are selectedJoining Two Groups-JOIN GR Ex. When group 3 is selected Ex. When group 3 is moved to groupMoving a Group-MOVE GR Loading slot Ungrouping Tracks-UNGROUPDissolving All Groups-UNGR ALL Insert an MD you want to edit into the MDErasing Tracks in a Group-ERASE GR Ex. When group 6 is selectedIntroducing Track Editing Functions Press UP ¢ or Down 4 to select the track you want to divide Ex. When adjusting the point byEx. When track 12 is selected Dividing a Track-DIVIDEJoining Two Tracks-JOIN Ex. When tracks 2 and 3 are selectedEx. When track 3 is moved to track Moving a Track-MOVEPress UP ¢ or Down 4 to select the track you want to move Appears on the display Track marked with Will be erased Erasing Tracks-ERASEErasing All Tracks-ALL Erase You can select up to 15 tracksPress Title Edit Enter the unit into the title entry modePress UP ¢ or Down 4 to change the title entry mode Assigning Titles to an MDPress 0 MD eject on the unit to eject Press Cancel to exit from the title entry modeEnter characters Press Enter to finish the current title entryMake sure that the character you want to change is flashing To Change the TitleYou can assign titles during play or recording You can make a correction or change the titleSet the start time Using the TimersUsing Recording Timer Set the shut-off timeMD REC Tape REC To turn off the Recording Timer after its setting is doneTo turn on the Recording Timer again Select the device to record ontoUsing Daily Timer How Daily Timer actually worksSelect the source to play back Select the fade setting Adjust the volume levelPress Sleep repeatedly Using Sleep TimerTimer Priority How Sleep Timer actually worksOperation buttons Initial Setting Using Choice MenuConfiguration of the choice menus Introducing the Choice MenusPress cursor 3/2 repeatedly to display the Picture menu Operating ProcedurePress Enter to finish the setting Press ChoiceLanguage selection menu-LANGUAGE Picture setting menu-PICTUREDynamic Range Compression Other setting menu-OTHERSRestricting the Access Level-Parental Lock Setting Parental LockRemember your password or make a note of it To return to Others menu Changing the Parental Lock settingWhen you enter wrong password three times Releasing Parental Lock temporarilyCountry/Area codes list for Parental Lock Release TV Press TV to operate your TV Changing the Preset Signal CodesSet the AUDIO-TV switch to TV Press and hold TV Operating Other Manufacturers’ TVAvailable operations Using AV Compu Link Control SystemConnection diagram AV Compu Link connectionGlossary Handling discs MaintenanceCleaning the unit General NotesAtrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc TypesMD limitations Language Code ListScms Serial Copy Management System 1st GenerationFor Disc Output Signals through the DVD Optical Digital OUT TerminalCD with DTS Digital Surround MP3 disc Output Signals Disc/MD MessagesX1 only For MDSymptom TroubleshootingGeneral Supplied accessoriesTuner Section Cassette deck SectionEN, CS Victor Company of JAPAN, Limited 1203AIMMDWJEM