JVC UX-J99DVD manual Disc/MD Messages, Output Signals through the DVD Optical Digital OUT Terminal

Page 92

English

Additional Information (Continued)

Output Signals through the DVD OPTICAL DIGITAL OUT Terminal

Output signals differ according to the “DIGITAL AUDIO OUTPUT” setting. (See page 79.)

	DIGITAL AUDIO
Playback disc	OUTPUT
Playback disc

DVD VIDEO

with 48 kHz, 16/20/24 bit Linear PCM with 96 kHz, Linear PCM

with Dolby Digital

with DTS Digital Surround

DVD AUDIO

with 48/96/192 kHz, 16/20/24 bit Linear PCM

with 44.1/88.2/176.4 kHz, 16/20/ 24 bit Linear PCM

with Dolby Digital

with DTS Digital Surround

SVCD, VCD, CD

CD with DTS Digital Surround MP3 disc

	Output Signals
STREAM/PCM	DOLBY DIGITAL/PCM		PCM ONLY
	48 kHz, 16 bit Linear PCM*
	48 kHz, 16 bit Linear PCM
Dolby Digital bitstream			48 kHz, 16 bit Linear PCM
DTS bitstream		48 kHz, 16 bit Linear PCM
	48 kHz, 16 bit Linear PCM*
	44.1 kHz, 16 bit Linear PCM*
Dolby Digital bitstream			48 kHz, 16 bit Linear PCM

DTS bitstream		48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream		48 kHz, 16 bit Linear PCM

* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DVD OPTICAL DIGITAL OUT terminal if the discs are not copy-protected.

•No signal is emitted through the DVD OPTICAL DIGITAL OUT terminal while playing an MP3 disc.

Disc/MD Messages

For Disc:

Message

CANNOT PLAY

NO AUDIO

LR ONLY

Signification

You are trying to play back an unplayable disc or a disc with scratches, etc.

You cannot hear any sound. (The disc you are trying to play back could be an illegal copy.)

You are trying to play back a disc contains multi-channel sound which down-mixing is prohibited on the disc, only signals of the front left and right channel are output.

Solution

Change the disc.

Consult with the dealer you purchased the disc from.

This is not a malfunction.

89

Image 92

Contents UX-J99DVD Page Important for Laser Products About This Manual PrecautionsIntroduction Contents Remote Control Remote ControlLocation of the Buttons and Controls Become familiar with the buttons and controls on your unitDisc trays compartment-5-DVD changer Front PanelFront panel Group indicator Reverse mode indicatorDisplay window on the front panel Display windowConnecting Antennas Getting StartedUnpacking Attach the FM antenna to the FM 75 Ω Coaxial terminalConnecting Speakers To connect an outdoor FM antennaAM antenna To connect an outdoor AM antennaTo remove the speaker grilles Connecting a TVRelease your finger from the clamp Connecting Other Equipment Color system of TV Color system settingTo select the color system To connect analog audio equipmentBasic and Common Operations Setting the ClockTurning On the Power and Starting Playback Adjusting the Volume Level To turn down the volume level temporarilyReinforcing the Bass Sound Press Fade MutingAdjusting the Tone Changing the Scanning ModeChanging the Display Brightness Press Dimmer while the unit is turned onSetting the AM Tuner Interval Spacing Listening to FM and AM BroadcastsPresetting Stations Tuning in to a Preset StationPlaying Back Discs on the 5-DVD Changer Disc InformationPlayable disc types About copy protectionDisc structure Playback Control function PBC-SVCD and VCD onlyLoad discs into the 5-DVD changer Loading DiscsPlaying Back All the Discs-Continuous Play Press ¢ or 4 during playback Basic Disc OperationsPress GROUP/TITLE I or GROUP/TITLE I during playback Using the number buttons Press ¡ orPress ¢ or 4 repeatedly Press DISP/CHARAPlaying Back by Using the Disc Menu When playing a DVDWhen playing a Svcd or VCD Press TOP Menu or MenuPrograming the Track Playing Order Program Play Press the number buttons to select a disc trayProgram other tracks you want Press DVDTo check the programed contents Playing at Random-Random PlayTo exit from Program Play To modify the programRepeating Playback-Repeat Play Prohibiting Disc Ejection-Disc LockPress Repeat To exit from Random PlayAdvanced Disc Operations About the On-screen BarPress on Screen Indication Meanings Available discsOperation through the On-screen Bar Press on Screen twicePress Enter On-screen guide iconsTo repeat a current title, group, chapter, or all tracks Press cursor ∞/5 repeatedly to select Repeat Play modeRepeating Playback Press cursor ∞/5 repeatedly to select A-B To repeat a desired portion-A-B RepeatLocating a desired position-Time Search While playing back a DVDEx. When playing a DVD Audio Locating a desired chapter/trackTo correct a misentry Unit starts playback from the specified timeSelecting the Audio Language Selecting the Subtitle LanguagePress Audio Press Audio repeatedly to select the desired audio languageSelecting a View Angle Selecting Browsable Still Pictures recorded onPress Angle Press Angle repeatedly to select the desired view anglePress Virtual Surround Press Audio repeatedly to select the desired audio channelEx. ST 1 ST 2 L 1 R 1 L 2 R ST 1/STSpecial Picture Playback Press 8 oncePress 8 repeatedly Press Slow 9 ¡ orChanging the VFP Setting Press cursor 3/2 repeatedly to select the VFP modeRepeat steps 2 to 4 to adjust other parameters Press VFPPlaying Back a Bonus Group Select a bonus groupWhile the key number entry indication appears On the display On the TV screenPress ¢ / 4 repeatedly as many times as required MP3/JPEG Disc PlaybackPress DVD 8 or #¥8 DVD on the unit Operations through the MP3/JPEG Control Screens Press cursor ∞/5 repeatedly to select a groupPress DVD 3 or Enter Press Repeat during or before playBasic MD Operations Playing Back an MDPlaying Back the Entire MD Normal Play To go to another track directly using the number buttons While playing or pausingRecording length mode To change the information shown on the displayTo check the program contents Load an MDPress the number buttons to select the tracks Repeat to program other tracks you wantPress GROUP/TITLE I or GROUP/TITLE I to select a group Playing Tracks in a Group-Group PlayLoad an MD including groups Press Title Search Press Repeat repeatedly during or before playEnter the characters to search for the track title MD Repeat ALLTo prohibit MD ejection-MD Lock Playing Back a Tape Playing Back a TapePress REV.MODE Press Tape 2Turn down the volume level to Volume MIN Listening to External EquipmentListening to External Equipment Press AUXRecording on an MD Before You Start Recording on an MDAbout the track marks To avoid erasing important recordingsPress Group REC ON/OFF Setting MD Recording ModesPress LP Press CD REC Mode to select the recording mode When recording from a CD-R/RWRecording discs onto an MD Disc-MD Synchronized Recording Press REC Speed to select the recording speed you wantTo record a single track during play or pause Recording Other Sources onto an MDPrepare the source to record from Manual Mark Time Auto Mark Press TR. Mark Select to select track mark entry modeREC MD recording indicator starts flashing On the display Recording on a Tape Before You Start Recording on a TapeTo protect your recordings To keep the best recording and playback sound qualityRecording onto a Tape Press Tape RECPress REV.MODE to select a reverse mode When recording a disc or an MDRecording Disc onto a Tape Disc-Tape Synchronized Recording To record from the desired trackMD and tape Elapsed Recording indicators When recording on an MD and a tape at the same timeRecording Discs onto an MD and a Tape Disc Synchronized RecordingUsing MD Groups as a separate item How to make up GroupsEditing an MD Guidance-MD Group Functions13 14 Introducing Group Editing FunctionsGroup When Cannot FORM! appears on the display in step Forming a Group-FORM GRInsert an MD you want to edit into the MD loading slot During playbackWhen Cannot ENTRY! appears on the display in step Adding a Track to a Group-ENTRY GRPress UP ¢ or Down 4 to select the track Press GROUP/TITLE I or GROUP/TITLE I to select the groupEx. When track 18 is selected Dividing a Group-DIVIDE GRJoining Two Groups-JOIN GR When Cannot Join appears on the display in stepEx. When groups 7 and 8 are selected Moving a Group-MOVE GR Ex. When group 3 is selectedEx. When group 3 is moved to group Ungrouping Tracks-UNGROUP Dissolving All Groups-UNGR ALLInsert an MD you want to edit into the MD Loading slotEx. When group 6 is selected Erasing Tracks in a Group-ERASE GRIntroducing Track Editing Functions Ex. When adjusting the point by Ex. When track 12 is selectedDividing a Track-DIVIDE Press UP ¢ or Down 4 to select the track you want to divideEx. When tracks 2 and 3 are selected Joining Two Tracks-JOINPress UP ¢ or Down 4 to select the track you want to move Ex. When track 3 is moved to trackMoving a Track-MOVE Erasing Tracks-ERASE Erasing All Tracks-ALL EraseYou can select up to 15 tracks Appears on the display Track marked with Will be erasedEnter the unit into the title entry mode Press UP ¢ or Down 4 to change the title entry modeAssigning Titles to an MD Press Title EditPress Cancel to exit from the title entry mode Enter charactersPress Enter to finish the current title entry Press 0 MD eject on the unit to ejectTo Change the Title You can assign titles during play or recordingYou can make a correction or change the title Make sure that the character you want to change is flashingUsing the Timers Using Recording TimerSet the shut-off time Set the start timeTo turn off the Recording Timer after its setting is done To turn on the Recording Timer againSelect the device to record onto MD REC Tape RECSelect the source to play back Using Daily TimerHow Daily Timer actually works Adjust the volume level Select the fade settingUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Press Sleep repeatedlyInitial Setting Using Choice Menu Configuration of the choice menusIntroducing the Choice Menus Operation buttonsOperating Procedure Press Enter to finish the settingPress Choice Press cursor 3/2 repeatedly to display the Picture menuPicture setting menu-PICTURE Language selection menu-LANGUAGEOther setting menu-OTHERS Dynamic Range CompressionRemember your password or make a note of it Restricting the Access Level-Parental LockSetting Parental Lock Changing the Parental Lock setting When you enter wrong password three timesReleasing Parental Lock temporarily To return to Others menuCountry/Area codes list for Parental Lock Changing the Preset Signal Codes Set the AUDIO-TV switch to TV Press and hold TVOperating Other Manufacturers’ TV Release TV Press TV to operate your TVUsing AV Compu Link Control System Connection diagramAV Compu Link connection Available operationsGlossary Maintenance Cleaning the unitGeneral Notes Handling discsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Language Code List Scms Serial Copy Management System1st Generation MD limitationsOutput Signals through the DVD Optical Digital OUT Terminal CD with DTS Digital Surround MP3 disc Output SignalsDisc/MD Messages For DiscFor MD X1 onlyTroubleshooting SymptomSupplied accessories Tuner SectionCassette deck Section GeneralEN, CS Victor Company of JAPAN, Limited 1203AIMMDWJEM