JVC UX-J99DVD manual Select the device to record onto, MD REC Tape REC

5 Select the device to record onto.

(1) Press cursor 3/2 repeatedly to select the device.

MD REC TAPE REC

(2) Press SET.

(3)When you select “MD REC,” select the recording length mode (see page 46) by pressing cursor 3/2, then press SET again.

To turn off the Recording Timer after its setting is done

1Press CLOCK/TIMER repeatedly until “REC TIMER” appears on the display.

2Press CANCEL.

The (timer) and REC (recording timer) indicators go off from the display.

To turn on the Recording Timer again

1	Press CLOCK/TIMER repeatedly until “REC TIMER” appears
	on the display.
2	Press SET repeatedly until the settings are shown on the display
	for your confirmation.
	The (timer) and REC (recording timer) indicators light up on
	the display.

English

When you select “TAPE REC,” select Reverse Mode (see page 43) by pressing REV.MODE when you prepare the device.

When recording starts, reverse mode indicator

changes toautomatically.

The REC (recording timer) indicator stops flashing and remains lit. The contents of this setting appear on the display in sequence for your confirmation.

6 Press AUDIO to turn off the unit if

you have set the timer with the unit turned on.

To record onto an MD using the Group recording, press GROUP REC ON/OFF to turn on the Group recording after setting the Recording Timer (before turning off the unit).

Before the start time, the REC (recording timer) indicator and “REC TIMER STANDBY!” start flashing on the display.

REC

Before the shut-off time, the display changes as follows:

MD SP	REC
REC
x 1

•When you press 7 while Recording Timer works

The recording stops but the timer is not canceled. The unit automatically turns off (on standby) when the shut-off time comes.

•If the unit is kept turned on when the start time comes Recording Timer does not work at all.

Clock indication

72