THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometres per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down the STOP button whilst inserting the key into the console. When the information mode is selected, the following informa- tion will be shown:
The Time display will show the total number of hours that the treadmill has been used.
The Distance/Watts display will show the total number of miles that the walking belt has moved.
An E, for English miles, or an M, for metric kilometres, will appear in the Speed/ Pace display. Press the Speed + button to change the unit of measurement.
IMPORTANT: The Heart Rate/Calories display should be blank. If a “d” ap- pears in the display, the con- sole is in the “demo” mode. This mode is intended to be
used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a “d” ap- pears in the Heart Rate/Calories display when the information mode is selected, press the Speed – button so the display is blank.
To exit the information mode, remove the key from the console.
25