Horizon Fitness T203, CT7.1 PRE Assembly, Tools Included, Parts Included, Need HELP?, Unpacking

TOOLS INCLUDED:

FF 6 mm T-Wrench

FF 5 mm L-Wrench

FF 4 mm T-Wrench

PARTS INCLUDED:

FF 1 Console Assembly

FF 2 Console Masts

FF 2 Console Mast Brackets

FF 4 Hardware Bags

FF 1 Safety Key

FF 1 Audio Adapter Cable

FF 1 Bottle of Silicone Lubricant

(for 2 applications)

T202/T203:

FF 4 iPod® Dock Inserts

FF 1 iPod® Dock Rubber Plug

NEED HELP?

If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information is located on the back panel of this manual.

PRE ASSEMBLY

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack and assemble the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill.

WARNING

DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from packaging until specified to do so in the assembly instructions. You may remove the plastic wrap from console masts.

WARNING

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

5