STEP 3 – Side Cap Assembly
a)Attach Side Cap with (3) M4 x 6mm Phillips Screws at the bottom of the Upright.
Repeat on other side.
b)Use the Multi Hex Tool with Phillips Screwdriver provided to tighten.
Figure 3 - Install Side Caps
upright
M4 x 6mm
phillips screws
side cap
FOR 1500 UNITS ONLY
STEP 4 – Adding Cup Holders to the
Console Base Assembly
Insert Cup Holders into the two holes provided. Please make sure the taller side of the Cup Holder is facing away from the Walking Belt.
Assembly is now complete.
IMPORTANT:
Follow the “Setting Up Treadmill for Use” instructions on the next two pages to move the treadmill off the shipping carton so you may begin your workout.
8