NordicTrack NTL13007.0 user manual

Page 11

11. See drawing 11a. Remove the indicated #8 x

11a

11b

 

 

 

3/4" Screw (7) from the right Handrail (70).

 

Console

 

 

 

 

 

 

 

 

 

Assembly

 

See drawing 11b. Slide the Right Upright

 

 

 

 

 

Sleeve (9) up to the console assembly. Attach

 

 

 

 

 

the Right Upright Sleeve with two #8 x 1" Tek

 

 

 

 

 

Screws (82) and the #8 x 3/4" Screw (7) as

70

 

 

 

 

shown.

 

 

 

 

 

Attach the Left Upright Sleeve (not shown) in the

 

 

7

 

 

7

 

 

 

 

same way.

 

9

 

 

 

 

82

 

 

 

 

 

12

With the help of a second person, carefully

12

 

 

 

 

lower the Uprights (85) to the position shown.

 

 

 

 

 

 

 

 

 

Attach the Right Base Cover (86) with three #8 x

 

 

 

 

 

3/4" Screws (7) and two Base Cover Screws

 

 

 

 

 

(63). Start all five Screws and then tighten

 

85

 

 

 

them. Be careful not to overtighten the

 

 

 

 

 

 

 

 

 

Screws. Attach the Left Base Cover (88) in the

 

 

 

7

 

same way.

 

 

 

 

 

 

 

 

 

With the help of a second person, carefully raise

 

 

 

88

 

the Uprights (85) to the vertical position.

 

 

 

 

 

 

 

63

 

 

 

 

 

 

 

 

7

 

 

 

 

 

86

 

 

 

 

 

63

 

 

13. Note the location of the 75 ohm terminal on the

13

 

 

 

 

treadmill. For the television to operate, an

 

 

 

 

 

 

 

 

 

audio/video wire must be connected to the

 

 

 

 

 

audio/video input jack on the back of the con-

 

 

 

 

 

sole, a personal audio/video player must be con-

 

 

 

 

 

nected to the audio/video plug on the console, or

 

 

 

 

 

a CATV cable must be connected to the 75 ohm

 

 

 

 

 

terminal (see page 13).

 

 

 

 

 

 

 

 

 

75 Ohm

 

 

 

 

 

Terminal

14.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place. The hex key is used to adjust the walking belt (see page 30). To protect the floor or car- pet from damage, place a mat under the treadmill.

11

Image 11
Contents On the WEB QUESTIONS?Please do not Contact Call TOLL-FREETable of Contents Important Precautions Page Power Lines Service Before YOU Begin Leg Bolts AssemblyMake sure that the power cord is unplugged As shown. Firmly tighten the Extension Leg Bolts Pull on the sleeve to make sure that it is locked into place Start all four Console Bolts and then tighten Them Not shown. Make sure that no wires are PinchedPage Wire Receiver 105 Cylinder HOW to Connect AN External Source Using a Catv Cable HOW to Connect a 75 OHM Catv CablePRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Press the Start button to start the program HOW to USE a Preset ProgramHOW to USE a Pulse Program See on HOW to Create a Custom Program HOW to USE a Custom Program Measure your heart rate if desired HOW to USE AN Ifit CardPress the Channel buttons to select the desired channel HOW to Operate the Personal TelevisionPress the Volume buttons to adjust the volume HOW to USE the Stereo Sound SystemPress the Power button again and add or re- move channels Information ModeOptional Chest Pulse Sensor HOW to Adjust the Cushioning SystemHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onProblem Television reception is poor Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description R1107AQty NTL13007 Exploded Drawing B-Model No. NTL13007.0 Exploded Drawing C-Model No. NTL13007.0 Exploded Drawing D-Model No. NTL13007.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty