NordicTrack NTL13007.0 user manual Information Mode

Page 25

THE INFORMATION MODE

The console features an information mode that allows you to view treadmill usage information, select a sys- tem of measurement for the console, and turn on and turn off the demo mode. The information mode also al- lows you to adjust the settings of the television and to save channels into the television’s memory.

Follow the steps below to use the information mode.

1.Hold down the Stop button while inserting the key into the console.

When the information mode is selected, the lower part of the screen will show the total number of miles or kilometers that the walking belt has moved (DISTANCE) and the total number of hours that the treadmill has been used (TIME).

In addition, the center of the screen will show the word ENGLISH, for miles, or the word METRIC, for kilometers. Press the Speed increase button to change the unit of measurement if desired.

The words AUDIO TRAINER: ALL, AUDIO

TRAINER: ON, or AUDIO TRAINER: OFF will also appear in the center of the screen. When you use an iFIT card, the voice of a personal trainer will guide you through your workout. When the AUDIO TRAINER: ALL setting is selected, the personal trainer will guide you through your work- out and instruct you how to purchase more iFIT cards. When the AUDIO TRAINER: ON setting is selected, the personal trainer will simply guide you through your workout. When the AUDIO TRAINER: OFF setting is selected, the voice of the personal trainer will not be heard. Press the Incline decrease button repeatedly to select the de- sired audio setting.

The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the con- sole will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the con- sole. However, when you remove the key, the dis- plays will remain lit, although the buttons will not function. If the demo mode is turned on, the words DEMO ON will appear in the center of the display while the information mode is selected. To turn on or turn off the demo mode, press the Speed de- crease button.

2.Press the Power button and adjust the bright- ness, contrast, color, sharpness, and/or hue of the television.

When the Power button is pressed, the brightness level indicator will appear on the television screen. Press the Volume buttons to adjust the brightness setting if desired.

Next, press the Channel buttons until the contrast, color, sharpness, or hue level indicator appears. Adjust the settings, if desired, by pressing the Volume buttons.

3.Press the Power button again and add or re- move channels.

Note: Complete this step only if you are using analog cable.

After all valid channels available in your area have been saved into the television’s memory (see step 5 on page 26), you can manually add channels or remove unwanted channels.

To add or remove a channel, first press the Channel buttons until the desired channel number appears on the screen. Then, press the Volume increase button to add the channel, or the Volume decrease button to remove the channel. Continue this process until you have added all desired channels and removed all unwanted channels.

4.Press the Power button again and select a cable connection if necessary.

If you have connected a CATV cable, one of the three Cable settings should be selected; try all three Cable settings, if necessary, to find the opti- mal setting. Press the Volume increase button to select the Standard Cable setting, the Channel decrease button to select the Cable IRC setting, or the Channel increase button to select the Cable HRC setting.

25

Image 25
Contents Please do not Contact QUESTIONS?Call TOLL-FREE On the WEBTable of Contents Important Precautions Page Power Lines Service Before YOU Begin Make sure that the power cord is unplugged AssemblyLeg Bolts As shown. Firmly tighten the Extension Leg Bolts Pull on the sleeve to make sure that it is locked into place Start all four Console Bolts and then tighten Them Not shown. Make sure that no wires are PinchedPage Wire Receiver 105 Cylinder HOW to Connect AN External Source Using a Catv Cable HOW to Connect a 75 OHM Catv CableHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Press the Start button to start the program HOW to USE a Preset ProgramHOW to USE a Pulse Program See on HOW to Create a Custom Program HOW to USE a Custom Program Measure your heart rate if desired HOW to USE AN Ifit CardPress the Volume buttons to adjust the volume HOW to Operate the Personal TelevisionHOW to USE the Stereo Sound System Press the Channel buttons to select the desired channelPress the Power button again and add or re- move channels Information ModeOptional Chest Pulse Sensor HOW to Adjust the Cushioning SystemHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onProblem Television reception is poor Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description R1107AQty NTL13007 Exploded Drawing B-Model No. NTL13007.0 Exploded Drawing C-Model No. NTL13007.0 Exploded Drawing D-Model No. NTL13007.0 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT