NordicTrack NTL13007.0 user manual As shown. Firmly tighten the Extension Leg Bolts

Page 8

2. Attach two Base Pads (81) to the base of the

2

 

Uprights (85) in the indicated locations with two

 

 

 

#8 x 1" Tek Screws (82). Note: One replacement

 

 

Base Pad may be included. Use the Base Pad to

 

85

replace any Base Pad that becomes worn.

 

 

 

 

 

81

 

 

82

 

81

82

 

 

3. With the help of a second person, carefully tip

3

 

the treadmill onto its other side as shown.

 

 

 

Partially fold the Frame (55) so that the treadmill

 

 

is more stable. Do not fully fold the Frame

 

 

until the treadmill is completely assembled.

Bracket

 

Insert the other Extension Leg (97) into the indi-

85

 

 

110

cated bracket on the base of the Uprights (85).

 

 

87

 

 

Attach the Extension Leg (97) with two

 

 

Extension Leg Bolts (87), two 5/16" Star

 

 

Washers (110), and two Extension Leg Nuts

 

 

(91) as shown. Firmly tighten the Extension

91

 

Leg Bolts.

 

 

 

97

 

 

55

4. Attach two Base Pads (81) to the base of the

4

 

Uprights (85) in the indicated locations with two

 

 

 

#8 x 1" Tek Screws (82).

 

 

With the help of a second person, carefully tip

85

 

the treadmill down so that all four Base Pads

81

 

(81) are resting on the floor and the Uprights

 

 

 

(85) are in the vertical position.

 

 

 

82

 

 

82

81

 

 

 

8

 

Image 8
Contents QUESTIONS? Please do not ContactCall TOLL-FREE On the WEBTable of Contents Important Precautions Page Power Lines Service Before YOU Begin Leg Bolts AssemblyMake sure that the power cord is unplugged As shown. Firmly tighten the Extension Leg Bolts Pull on the sleeve to make sure that it is locked into place Not shown. Make sure that no wires are Pinched Start all four Console Bolts and then tighten ThemPage Wire Receiver 105 Cylinder HOW to Connect a 75 OHM Catv Cable HOW to Connect AN External Source Using a Catv CablePRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTurn on the fan if desired HOW to USE a Preset Program Press the Start button to start the programHOW to USE a Pulse Program See on HOW to Create a Custom Program HOW to USE a Custom Program HOW to USE AN Ifit Card Measure your heart rate if desiredHOW to Operate the Personal Television Press the Volume buttons to adjust the volumeHOW to USE the Stereo Sound System Press the Channel buttons to select the desired channelInformation Mode Press the Power button again and add or re- move channelsHOW to Adjust the Cushioning System Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopProblem Television reception is poor Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1107A Qty DescriptionQty NTL13007 Exploded Drawing B-Model No. NTL13007.0 Exploded Drawing C-Model No. NTL13007.0 Exploded Drawing D-Model No. NTL13007.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty