NordicTrack NTEL7906.0 user manual See the inset drawing. Lift the Pedal Arm

Page 7

4. Identify the Left Pedal (34) and the Left Pedal	4
Arm (32), which are marked with stickers.	4		34
Arm (32), which are marked with stickers.			34
Attach the Left Pedal (34) to the Left Pedal	32
Arm (32) with two M6 x 62mm Screws (108),	32
two M6 x 35mm Screws (109), and four M6
Split Washers (102).
Attach the Right Pedal (not shown) to the
Right Pedal Arm (not shown) in the same
way.		102
		102
		109	102
	108		102
	108		109
			109
			102
5. Insert the Roller (38) on the Left Pedal Arm (32)	5
and the Roller on the Right Pedal Arm (33) into	5			116
and the Roller on the Right Pedal Arm (33) into
the sides of the Ramp (5).
the sides of the Ramp (5).				7
				7
Attach the Rear Ramp Cover (7) to the
Ramp (5) with two M4 x 16mm Screws (116).			33
			33
See the inset drawing. Lift the Pedal Arm
Latch (41) on the Left Pedal Arm (32) and set
the end of the Left Pedal Arm on the left Crank
Bushing Sleeve (54). Release the Pedal Arm
Latch; make sure that the Left Pedal Arm is
securely connected to the Crank Bushing
Sleeve.				38
		5		38
Connect the Right Pedal Arm (33) to the		5
Connect the Right Pedal Arm (33) to the
right Crank Bushing Sleeve (not shown) in
the same way.
			32
		32
		41
		54
	7

Image 7

Contents Model No. NTEL7906.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Rear Before YOU BeginFront Right SideScrew M10 x 93mm Button Screw Assembly111 Grease See the inset drawing. Lift the Pedal Arm Attach the Right Upper Body Arm 23 Same way Frame 1 be careful not to damage the WireWire Harnesses 64, 65 during This step Be careful notAttach the Right Link Arm 31 in the same way Repeat this step with the Right Link ArmHOW to Plug in the Power Cord HOW to USE the Elliptical ExerciserHOW to Fold and Unfold the Elliptical Exerciser HOW to Exercise on the Elliptical Exerciser HOW to Move the Elliptical ExerciserFeatures of the Console Console DiagramPedals and the incline of the ramp as desired HOW to USE the Manual ModeSelect the manual mode Pedaling to turn on the consoleWill turn off automatically Turn on the fan if desiredTurn on the console. See on Select a preset program HOW to USE a Preset ProgramBegin pedaling to start the program Turn on the console. See on Select a custom program HOW to Create a Custom ProgramProgram the desired settings Follow your progress with the displayUsing it. To change the resistance level for HOW to USE a Custom ProgramMemory. To change the target pace for the cur Enter a target heart rate setting HOW to USE a Heart Rate ProgramTurn on the console. See on Select a heart rate program Begin pedaling to start the program HOW to USE the Stereo Sound System HOW to USE AN Ifit ProgramHOW to Adjust the Belt Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part LIST-Model No. NTEL7906.0Qty Description R1006A Exploded Drawing B-Model No. NTEL7906.0 Limited Warranty HOW to Order Replacement Parts