39. Wrap the Leg Lever Cable (51) around a 90mm | 39 |
|
Pulley (48). Attach the Pulley to the Left Press |
| |
|
| |
Arm (15) with an M10 x 50mm Bolt (97), two Half |
|
|
Guards (55), an M10 Washer (80), and a Cable | 97 |
|
Trap (56). Make sure that the Cable Trap and |
| |
|
| |
the Half Guards are oriented as shown. |
|
|
| 51 | 15 |
| 48 |
|
| 55 80 |
|
| 56 | 77 |
| 55 | |
40. Attach the Leg Lever Cable (51) to the Upright (2) | 40 |
|
with the M10 x 120mm Bolt (115), an M10 |
| |
|
| |
Washer (80), a 7mm Spacer (111), and an M10 |
|
|
Nylon Locknut (77). See the inset drawing. |
|
|
Make sure that the flat edge of the Cable is |
|
|
against the Upright. |
|
|
2
115
| 80 |
| 111 |
51 | 77 |
Flat Edge
Seat Assembly
41.Attach the Right Butterfly Pad (35) to the Right Butterfly Arm (26) with two M6 x 65mm Button Screws (91) and two M6 Washers (114).
Repeat this step for the Left Butterfly Pad (34).
41 |
26 |
114 |
35 |
91 |
34 |
22