14. |
| 15. | Insert handle assembly |
Apply logo and height indicator labels (19) to | SIDE |
| through pole mount assembly |
| as shown. Lock pole | ||
adjustment rod (18) as shown. Attach handle parts | ACCESS |
| assembly in place at the 10’ |
(37, 38) to adjustment rod with screw (21), |
|
| (3.05 m) mark with pin (16). |
carriage bolt (20), and flange nut (8) as shown. |
|
|
|
NOTE: Holes in adjustment rod allow for either rear access or side access.
16
18
19
IMPORTANT!:
Indicator labels should be applied as close to holes as possible to prevent labels from being damaged during height adjustment.
38
20
8
37 | 20 |
| |
| 21 |
19 | 12/05 | ID# M881111 |