12. Attach spacers (12, 13) to pole mount bracket (6) with bolts (9), washers (10), and nuts (11) as shown.
IMPORTANT!:
Tighten just until
washers (10) stop moving.
12
10
11
13
6 | 10 |
|
9
13 | 12 |
13.
Assemble lanyard (17) to locking pin (16) as shown. Attach covers
(14)onto pole mount bracket (6) with carriage bolt (15) and nut (8) as shown.
IMPORTANT!
Loop end of pin lanyard
(17)over carriage bolt
(15)as it passes through the pole mount bracket (6) during this assembly.
DO NOT OVERTIGHTEN
14
8 |
6
14
15
6
8
6
15
17
17
16
ID# M881111 12/05 | 18 |