Horizon Fitness Elliptical Troubleshooting for LS625E

Page 27

T R O U B L E S H O O T I N G

Your Limited Series elliptical is designed to be reliable. However, if you do experience problems with your elliptical, please reference the troubleshooting guide listed below.

PROBLEM: The console does not light up.

SOLUTION: Verify the following:

The outlet the machine is plugged into is functional. Double check that the breaker has not tripped.

The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.

The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.

The power switch is turned to the ON position (may not apply to all models).

Turn off the machine and unplug power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched.

NOTE: If your console uses batteries, they may need to be replaced.

PROBLEM: The console lights up but the Time/RPM’s do not count.

SOLUTION: Verify the following:

Turn off machine and unplug power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched.

If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or damaged.

PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.

SOLUTION: Verify the following:

The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.

Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.

PROBLEM: The roller wheels appear to be leaving particles on the guide rails.

SOLUTION: This is considered normal wear of the elliptical wheels.

To remove, simply wipe off the roller wheels and guide rails with a damp cloth.

PROBLEM: The elliptical makes a squeaking or chirping noise.

SOLUTION: Verify the following:

The elliptical is on a level surface.

Loosen all bolts attached during the assembly process, grease the threads, and tighten again.

INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

27

LIMITED WARRANTY

Image 27
Contents L I P T I C a L USER’S Guide Page T R O D U C T I O N Table of ContentsImportant Precautions Unpacking S E M B LYParts Included Conditioning Troubleshooting Guidelines & MaintenanceS E M B LY Step S E M B LY Step Console Mast S E M B LY Step Split Teflon Washer E Inside YOU’RE Finished Assembly C O N T I N U E DLocation of the Elliptical Before YOU BeginFoot Positioning PowerElliptical Operation MovingConsole Display Heart Rate Quick StartSelecting Programs Selecting Target Heart Rate ProgramRamp RollingValley FAT BurnPerceived Exertion Level Conditioning GuidelinesWhat is Target Heart Rate Zone? Target Heart Rate Zone ChartStanding Quadriceps Stretch P S StretchingStretch First Standing Calve Muscle StretchWarm UP Achieving Your Fitness GoalsKeeping AN Exercise Diary Importance of Warm UP & Cool DownWeekly Totals Weekly LOG SheetsWeekly Totals Week # Distance Calories Time Monthly Totals Monthly LOG SheetsMonth Monthly Goal Troubleshooting When YOU are Near the Equipment Heart Rate TroubleshootingCan I Move the Trainer Easily Once IT is ASSEMBLED? Common Product QuestionsAre the Sounds MY Elliptical Makes NORMAL? HOW Long will the Drive Belt LAST?I N T E N a N C E Frame Lifetime Limited Home USE WarrantyCustomer Tech Support