A S S E M B LY STEP 5 |
|
|
| LOWER LINK ARM | LOWER |
|
| HANDLEBAR |
| TEFLON WASHERS |
|
| SPACER | |
GUIDE RAIL | LOWER HANDLEBAR | BOLT (J) |
| NUT (K) |
|
| LOWER LINK ARM | SPACER (H) |
|
| |
| TEFLON WASHERS (I) |
|
A)Open HARDWARE BAG FOR STEP 5 (contents on next page).
B)Slide SPACER (H) into LOWER LINK ARM.
C)Place TEFLON WASHERS (I) on either side of SPACER (H). While holding TEFLON WASHERS (I) slide LOWER LINK ARM into bottom end of LOWER HANDLEBAR.
D)Insert BOLT (J) into LOWER HANDLEBAR and secure using NUT (K).
E)Attach the OUTSIDE ELBOW COVER to elbow joint using 1 SCREW (L).
F)Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
G) Repeat on other side.
LOWER HANDLEBAR | OUTSIDE |
| ELBOW COVER |
INSIDE | SCREW (L) |
ELBOW COVER |
|
11
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES