A S S E M B LY STEP 1
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) |
20 mm | 18 mm | 20 mm |
Qty: 2 | Qty: 2 | Qty: 2 |
| MAIN FRAME |
END CAP |
|
| FRONT STABILIZER TUBE |
| BOLT (A) |
END CAP | SPRING WASHER (B) |
REAR STABILIZER | FLAT WASHER (C) |
|
A)Open HARDWARE BAG FOR STEP 1.
B)Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT WASHERS (C).
C)Fit both END CAPS into REAR STABILIZER TUBE.
ADJUSTING LEVELERS
Adjust the 2 rear levelers and 2 front levelers so that the elliptical is level on the floor.
ADJUST HEIGHT
LOCK ADJUSTMENT
7
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES