Precor Authorized Repair Services for Treadmills
Page 31

5.Press STOP or SPEED until the running belt comes to a complete stop.

6.Continue with steps 1 through 5 until the belt tension has been properly adjusted and you no longer feel the pause in the belt with each footplant.

Important: Do not turn the adjusting bolts more than 1/4 turn at a time. Overtightening the bolts can damage or cause premature failure of the precision bearings in the front and rear rollers.

Servicing the Treadmill

Do not attempt to service the M9.1 or M9.2s yourself except for the maintenance tasks described in this manual. The M9.1 or M9.2s does not contain any user-serviceable parts, or parts that require lubrication. For information about product operation or service, contact an authorized Precor dealer at 1-800-4-PRECOR.

Power Cord Maintenance

When the M9.1 or M9.2s is in use, ensure that the power supply cord is away from moving parts and cannot be damaged.

If the M9.1 or M9.2s power supply cord is damaged, it can only be replaced in a repair shop appointed by Precor because special tools are required.

M9.1 or M9.2s Long Term Storage

When the M9.1 or M9.2s is not in use, ensure that the power supply cord is unplugged from the wall outlet and is positioned so that it will not become damaged or interfere with other equipment or people.

There are no special storage requirements for the M9.1 or M9.2s other than ensuring that it is kept free from dirt, moisture, or damage.

Obtaining Service

Do not attempt to service the M9.1 or M9.2s Precision Electronic Treadmill yourself except for minor belt adjustments and maintenance as described in this manual. The treadmill does not contain any user-serviceable parts.

For information about product operation or service, contact an authorized Precor dealer or a Precor Factory Authorized Service Company. To locate the dealer or servicer nearest you, call 1-800-4-

PRECOR.

To help the customer service representative expedite your call, have your serial number available.

The serial number on the treadmill is written on a label located underneath the treadmill at the left, rear corner of the running bed frame. If you haven’t already written the serial number in the space provided below during the assembly process, you will need to get on your knees and bend down to see it.

Model number: M 9.1 Serial number: ___________________________________________

Model number: M 9.2s Serial number: ___________________________________________

If you have any questions regarding the treadmill, use the model and serial numbers whenever you call your Precor dealer or servicer.

page 25

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Precision Electronic Treadmill Important Safety Instructions Precor Smart Weights-Safety Guidelines Personal SafetyFCC Communications Commission, part Information Regarding International UseGrounding Instructions Diagram aTable of Contents Unpacking the M9.1 or M9.2s Treadmill Before You BeginOptional Equipment BCD Installation Requirements Setting Up the M9.1 or M9.2s TreadmillAssembly Instructions Column Install liftHandrail PlugBoard Flanged nuts a Base plate Motor chassis Cross beamAttach electronic console to Handrail clamp not shownHandrail clamp Attach trim strip to OvertightenLift column Handrails See Aligning the Running Belt Checking the Alignment of the Running BeltLocating the on and OFF Switch Using the M9.1 or M9.2s TreadmillUsing the Magnetic Safety Key Displays on the Electronic Console Understanding the Electronic ConsoleScan Keys on the Electronic ConsoleSelecting the Time or Distance Prompt on the M9.2s Changing the Display to U.S. Standard or MetricTreadmill Working Out on Your TreadmillQuick Steps to Working Out Cooling Down After a Workout Pausing Your WorkoutChanging Incline on the M9.1 Retrieving the Previous Workout ProgramChanging the Interval Course Profile Using the Manual Course ModeUsing the M9.2s Preprogrammed Courses Page Erector Spinae Gluteals Hip Flexors Getting the Most Out of Your WorkoutHow Hard Should I Exercise? Heart Rate Training Zone How Often Should I Exercise? How Long Should I Exercise?Maintaining Your Treadmill Cleaning the EquipmentAligning the Running Belt Running belt Adjusting the Tension of the BeltSide platform Running bed Rear roller M9.1 or M9.2s Long Term Storage Power Cord MaintenanceObtaining Service Servicing the TreadmillElectronic Specifications SpecificationsElectronic Displays
Top Page Image Contents