Precor C966 owner manual Quickstart Default Values, Prompts DefaultValue

Page 31

C O M M E R C I A L P R O D U C T S D I V I S I O N

Important: As a safety feature, a sharp tug on the security cord that is attached to the Stop key will cause the running belt to stop. It is a requirement that a user attach the security clip on his or her clothing while working out. Please refer to Using the Security Clip on page 33.

SPEED CONTROL ▼▲: The Speed ▲ key initiates the movement of the running belt at the beginning of a course and lets you designate the target speed. During a workout, the Speed ▼▲ keys let you increase or decrease the running belt’s speed. Speed changes can range from 0.5 to 16 mph (1 to 25 kph) in 0.1 increments.The speed in the Interval course can be programmed by the user. The speed of the running belt can also be modified and limited by the club. Check with the club manager or refer to Club Information on page 21.

Note: When you press the Speed ▼▲ key, the number that appears on the display shows the target speed and may differ slightly from the actual speed because the display can change much faster than the running belt. Eventually, the two meet at the target speed.

Another feature of the Speed ▼▲ keys lets you review the treadmill’s speed and pace any time during your workout. If SPEED and/or PACE is not one of the chosen features being displayed, you can view the speed of the running belt and your pace by lightly touching the Speed ▼ or ▲ key. A 2-second display lets you review your speed and pace.You can opt to change the speed, if you hold the key down for a few more seconds.

Note: The numeric keys can also be used to adjust the speed. Please refer to Numeric keys above.

QUICKSTART: QuickStart lets you bypass the Setup prompts and start your workout immediately using the Manual course. Default values apply.

QUICKSTART Default Values

Prompts

DefaultValue

 

 

Course

Manual

Time

The Club limit. Weight Loss course is fixed at 28 minutes.

Weight

150 lbs. (68 kg.)

Age

0 : An Age entry must occur to utilize the SmartRate® display.

 

If QuickStart is pressed after an Age is entered, then the

 

SmartRate® display will appear when you hold onto the heart

 

rate touch-sensitive grips on the handrail or wear the POLAR®

 

chest strap. If no Age entry occurs, the SmartRate® display

 

lights up, but no blinking sensor appears.

 

 

page 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents M M E R C I a L P R O D U C T S D I V I S I O N Important Safety Instructions Grounding Instructions Safety ApprovalTable of Contents Back cover MaintenanceExercising on the Treadmill CoursesEuropean Applications Radio Frequency Interference RFIAbout this Manual Obtaining ServiceStandard Equipment Unpacking the TreadmillOther Equipment Hardware KIT Additional Tools Needed Setting Up the TreadmillInstallation Requirements Assembly InstructionsDiagram Remove Attach Connect M M E R C I a L O D U C T S V I S I O N Diagram 13 Handrail alignment and installation Diagram M M E R C I a L O D U C T S V I S I O N Power cord to Checking the Alignment of the Running Belt Turning the Unit on and OFFIf the running belt Then Club Information Changing the Club SettingsSelecting the Language To access the Club settings, the following must occurSpeed , Speed , Speed , Reset, Speed , Speed , Speed Keypad key functions within the Club Custom ModeDetermining the Club Speed Limit Setting a Workout Time LimitSetting a Pause Time Limit Setting a Cool Down Time LimitPress Enter to confirm your selection Speed or Incline or Enter Stop or ResetRemoving or Providing a Fitness Test Changing the Custom CoursesUser ID Entry Program Keys Using Csafe Standard EquipmentReset Speed , Speed Or, you can opt to use the number keys 6C966 Display Features on the Display ConsoleUpper Display TOP Display WindowsCenter Display M M E R C I a L P R O D U C T S D I V I S I O N Keypad Tips Keys on the Display ConsoleM M E R C I a L P R O D U C T S D I V I S I O N Chest strap. If no Age entry occurs, the SmartRate display Quickstart Default ValuesPrompts DefaultValue If QuickStart is pressed after an Age is entered, thenPress QuickStart at Following occurs A course You press This is what happens Using the Security ClipPAUSE, Cool DOWN, Summary and Exit Features Exercising on the TreadmillAt theWorkout Summary banner You press This is what happens Pause mode You press This is what happensSpeed Cool down You press This is what happensGrips on the handrail Quick Steps to Working OUTWorkout Tips For your Heart Rate to appear on the display, you need toCooling Down After a Workout Using the Smartrate Feature Heart Rate FeatureCourses Rate WeightTrack Course Manual Mode and the Quickstart KEYTo use the interval course, take the following steps 5K CoursePreprogrammed Courses Interval CourseFitness Test Custom CoursesFitness Test Guidelines You press the Stop key Random CourseHeart Rate Course Fitness Test ends if any one of the following occursWeight Loss Course GOAL-BASED Courses Perform a daily inspection of the treadmill MaintenanceCleaning the Equipment InspectionAlign Aligning the Running BeltStoring the Polar Chest Strap Servicing the TreadmillLong Term Storage Exploded Views View Exploded Views Exploded Views Exploded Views Thank You and Welcome to Precor How many members do you have? Date of PurchaseProduct Serial Numbers Please indicate the type and number of products purchasedComplete this portion and keep for your records Limited WarrantyWarranty Periods and Coverage Conditions and RestrictionsElectronic Specifications Product Specifications
Top Page Image Contents