JVC RX-DV5RSL manual Activate Realistic Sound Field, Stop Playback, Select Surround Mode

Page 19

4 Adjust the Volume

MASTER VOLUME

+

VOLUME

–

On the front panel

From the remote control

For details, see “Basic Operations” on page 11.

5 Activate Realistic Sound Field

You can activate Surround mode for creating realistic sound fields.

•You can activate Surround mode automatically when the digital multichannel source (Dolby Digital or DTS Digital Surround software) or 2-channel matrix source (Dolby Surround software) is played back—Auto Surround (see page 26).

When you activate or deactivate Surround mode manually, do the following procedures:

7 Stop Playback

 

FM MODE

On the front panel

From the remote control

Press 7.

Playback stops.

The unit memorizes the point where you stop playback and the RESUME indicator lights up on the display (except when an audio CD is loaded).

While the RESUME indicator is lit on the display, you can start playback from the memorized point by pressing 3—Resume play.

About Resume play

This unit can memorize the point when you operate the following procedures:

•Pressing 7 during playback—Pressing 3 starts Resume play

•Changing the source—Pressing DVD or 3 starts Resume play

•Turning off the unit (including Sleep Timer)

—Pressing 3 starts Resume play

Once you start Resume play, the RESUME indicator goes off (the unit clears the memorized point).

On the front panel:

Press SURROUND ON/OFF.

From the remote control:

1)Press CONTROL repeatedly so that “SOUND” appears on the operation mode display.

SURROUND

ON/OFF MODE

REC MODE

CONTROL

The unit also clears the memorized point when you operate the following procedures:

• Starting Resume play

 

• Pressing 7 (while the RESUME indicator is lit on the display)

• Selecting a track by pressing ¢ or 4 for video CD and

super VCD when playback stops

 

• Selecting program or random playback

• Pressing TOP MENU

 

• Ejecting the loaded disc

 

• Turning on the unit by pressing

STANDBY/ON on the

SURR ON/OFF

2) Press SURR ON/OFF.

7

front panel or

STANDBY/ON AUDIO on the remote

control.

 

You can cancel Resume play (see “OTHERS menu” on page 58).

•Each time you press SURROUND ON/OFF on the front panel or SURR ON/OFF on the remote control, Surround mode is activated and deactivated alternately.

6 Select Surround Mode

When the

PRO LOGIC II or DSP indicator is lit, you can select

various Surround modes (see page 31).

SURROUND

 

ON/OFF

MODE

SURR MODE

 

 

10/0

 

REC MODE

 

On the front panel

From the remote control

Press SURROUND MODE (REC MODE) on the front panel or SURR MODE on the remote control.

•When you enjoy digital multichannel source such as Dolby Digital or DTS Digital Surround software, you cannot change Surround mode. When you enjoy Dolby Digital or DTS Digital Surround 2- channel including 2-channel matrix source such as Dolby Surround software, you can select Surround mode from between PRO LOGIC II MOVIE and PRO LOGIC II MUSIC (see page 31).

To remove the loaded disc

Press 0.

The disc tray opens.

To close the disc tray

Press 0 again.

8 Turn Off the Power (into Standby)

STANDBY/ON

STANDBY

STB VCR TV AUDIO

STANDBY/ON

On the front panel

From the remote control

Press STANDBY/ON on the front panel or STANDBY/ON AUDIO on the remote control.

The unit is turned off and the STANDBY lamp lights up on the front panel.

•If you press the button while the disc tray is open, the disc tray closes automatically, then the unit is turned off.

•A small amount of power is consumed even in standby mode. To turn off the power completely, unplug the AC power cord.

16

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RX-DV5RSL Important for Laser Products Above ALL Table of Contents Display Adjust button 27Parts Identification Front PanelParts Identification Remote ControlPTY 9 and buttons Display button Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started FM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionSpeaker Layout Diagram Connecting the SpeakersConnecting the subwoofer speaker Connecting the front, center, and rear speakersFor audio connections Connecting Audio/Video ComponentsAbout connecting cables/cords For Scart connectionsDigital connection Cassette deck/CD recorder connectionRGB Audio OUT Scart connectionVCR STB Audio VideoFor T-V Link VCRSTB Set Top Box For TV and video formatSelect the Source to Play Turn On the PowerAdjust the Volume Basic OperationsActivating TV Direct Turning Off the Power With the Sleep TimerTurning Off the Sounds Temporarily Changing the Display BrightnessBasic Operations Input modeOn the remote control When DVD is selected as the source, you can alsoChanging the Source Name Attenuating the Input SignalActivating the Recording Mode Input ATT indicatorStart Playback Basic DVD Player OperationsOpen the Disc Tray Load a DiscStop Playback Select Surround ModeTurn Off the Power into Standby Activate Realistic Sound FieldTuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode Operation Buttons Using the RDS Radio Data System To Receive FM StationsWhat information can RDS signals provide? Tuner OperationsSearching for a Program By PTY Codes Case Switching to Broadcast Program Your Choice TemporarilySport NewsAffairs InfoOperating Procedure Basic SettingsOperation Buttons ¶ For front speakers, center speaker, and rear speakers ¶ For subwooferYES Digital input Digital in terminals-DGT Basic SettingsSet the appropriate digital terminal setting Low frequency effect attenuator-LFEManual Select the source manually Auto surround-AUTO SRAuto mode-MODE On the displayAdjustment items Sound AdjustmentsPress Adjust Press Control 3 or 2 to adjust Front speaker balanceDAP effect level-EFFECT Adjusting sound from the remote controlFront speaker output balance -BAL balance Tone-BASS and TrebleDAP Digital Acoustic Processor modes Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundReflections from behind Early reflections Direct sounds All Channel StereoPossible × Impossible Creating Realistic Sound Fields Activating Surround ModeSelecting Surround Modes For using test tone Adjusting Surround Mode Using Remote ControlAdjust the sound Adjust the speaker output levels as followsDiscs you can play Disc Type DVD Player OperationsDisc Information Playable Disc TypesPlayback Control function PBC Disc structureMenu-driven playback Meanings Available discs Using the On-screen BarEx. When a DVD Video is played DVD Player OperationsChanging the Time Indication Basic Operation through the On-screen BarPress on Screen twice Press EnterFrom the VCD/SVCD menu with PBC Locating a Desired Scene from Disc MenuPress TOP Menu or Menu From the DVD menuPress and hold Angle for a few seconds Selecting a View Angle-ANGLEPress Angle Press Angle repeatedly to select the desired view anglePress Audio repeatedly to select the desired audio language Changing the Languages-SUBTITLESelecting the subtitle language ST 1 ST 2 L 1 R 1 L 2 R Press AudioPress Audio repeatedly to select the desired audio channel Selecting the audio channelLocating a desired position-Time Search Playing from a Specified Position on a DiscUse the number buttons 0-9 to enter the time Locating a desired chapter/track- Chapter/Track SearchPress cursor 5/∞/3/2 to move to the desired scene Press DigestLocating a desired scene-DIGEST Special Picture Playback To adjust the appearance of the picture Press cursor 3 or 2 repeatedly to select VFP modeRepeat steps 2 to 4 to adjust other parameters Changing the VFP setting-VFPPlaying back tracks in random order Program Playback and Random PlaybackRepeat to program the next steps Playing back in the desired orderRepeating a current title, chapter, or all Tracks Repeat PlaybackRepeating a desired part About indication on the front panel Activating Surround modeAdditional Information for DVD Audio Special Playback for DVD AudioPlaying back a bonus group Press cursor ∞ or 5 repeatedly to select the desiredPress the number buttons to select a bonus group Selecting a still pictureBasic Operations MP3 Disc PlaybackLoad an MP3 disc, then press Press Repeat Operations through the MP3 Control ScreenSlide-show Playback Jpeg Disc PlaybackLoad a Jpeg disc, then press Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress cursor ∞ or 5 repeatedly to select the desired option Press Enter to finish the settingPress Choice Press cursor ∞ or 5 repeatedly To move to on ScreenAuto Choice Menu OperationsLanguage menu Picture menuMAX Audio menuMP3 JpegSPK. Setting menu Select this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockNew setting is stored Changing the setting of Parental LockReleasing Parental Lock temporarily Country/Area codes list for Parental Lock Glossary for DVD Player Tuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTV Return Operating Video ComponentsREW Try to operate your TV by pressing Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment Release STANDBY/ON TVTry to operate your STB by pressing Using the number buttonsEnter the manufacturer’s code Release STANDBY/ON STBTry to operate your VCR by pressing If there are more than one code listed for your brandOperating Other Manufacturers’ Equipment Release STANDBY/ON VCRGeneral Notes MaintenanceCleaning Discs Cleaning the UnitGenaral TroubleshootingFor DVD Player For Jpeg TroubleshootingFor Tuner For MP3AM tuner SpecificationsAmplifier FM tuner IHFVictor Company of JAPAN, Limited 0702NHMMDWJEM
Top Page Image Contents