JVC RX-DV5RSL manual Troubleshooting, For Tuner, For MP3, For Jpeg

Page 74

Troubleshooting

7For Tuner

PROBLEM

Hard to listen to broadcast because of noise.

Continuous hiss or buzzing during FM reception.

Occasional cracking noise during FM reception.

7For MP3

POSSIBLE CAUSE

The AM loop antenna is too close to the unit.

The supplied FM antenna is not properly extended and positioned.

Incoming signal is too weak.

The station is too far away.

An incorrect antenna is used.

Antennas are not connected properly.

Ignition noise from automobiles.

SOLUTION

Change the position and direction of the AM loop antenna.

Extend the FM antenna at the best position.

Connect an outdoor FM antenna or contact your dealer.

Select a new station.

Check with your dealer to be sure you have a correct antenna.

Check connections.

Move the antenna farther from automobile traffic.

PROBLEM

A disc cannot be played.

No MP3 files except JPEG files are played.

POSSIBLE CAUSE

No MP3 files are recorded on the disc.

The disc is unplayable (such as CD- ROM).

MP3 files do not have the correct file extension—.mp3, .Mp3, .mP3, or .MP3 in their file names.

MP3 files are made at bit rate under 64 kbps.

MP3 files are not recorded in the format compliant with ISO 9660 Level 1 or 2.

The MP3/JPEG setting is set to “JPEG.”

SOLUTION

Replace the disc.

Add the file extension—.mp3, .Mp3, .mP3, or .MP3—to their file names (see page 49).

This unit cannot play back such files. Replace the disc.

Replace the disc. (Record MP3 files using a compliant application.)

When both MP3 files and JPEG files are recorded on a disc, to play MP3 files, set the MP3/JPEG setting to “MP3” (see page 56).

7For JPEG

PROBLEM

A disc cannot be played.

No JPEG files except MP3 files are played.

POSSIBLE CAUSE

No JPEG files are recorded on the disc.

The disc is unplayable (such as CD- ROM).

JPEG files do not have the correct file extension in their file names.

JPEG files are not made with baseline JPEG format.

JPEG files are not recorded in the format compliant with ISO 9660 Level 1 or 2.

The MP3/JPEG setting is set to “MP3.”

SOLUTION

Replace the disc.

Add the file extension—.jpg, .jpeg, .JPG,

.JPEG or any uppercase and lowercase combination (such as “.Jpg”)—to their file names (see page 51).

This unit cannot play back such files. Replace the disc.

Replace the disc. (Record JPEG files using a compliant application.)

When both MP3 files and JPEG files are recorded on a disc, to play JPEG files, set the MP3/JPEG setting to “JPEG” (see page 56).

71

Image 74
Contents RX-DV5RSL Important for Laser Products Above ALL Table of Contents Front Panel Adjust button 27Parts Identification DisplayPTY 9 and buttons Display button Remote ControlParts Identification Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories AM antenna connection Connecting the FM and AM AntennasGetting Started FM antenna connectionConnecting the front, center, and rear speakers Connecting the SpeakersConnecting the subwoofer speaker Speaker Layout DiagramFor Scart connections Connecting Audio/Video ComponentsAbout connecting cables/cords For audio connectionsCassette deck/CD recorder connection Digital connectionVideo Scart connectionVCR STB Audio RGB Audio OUTFor TV and video format VCRSTB Set Top Box For T-V LinkBasic Operations Turn On the PowerAdjust the Volume Select the Source to PlayChanging the Display Brightness Turning Off the Power With the Sleep TimerTurning Off the Sounds Temporarily Activating TV DirectWhen DVD is selected as the source, you can also Input modeOn the remote control Basic OperationsInput ATT indicator Attenuating the Input SignalActivating the Recording Mode Changing the Source NameLoad a Disc Basic DVD Player OperationsOpen the Disc Tray Start PlaybackActivate Realistic Sound Field Select Surround ModeTurn Off the Power into Standby Stop PlaybackTuning into Stations Manually Using Preset Tuning Tuner OperationsSelecting the FM Reception Mode Tuner Operations Using the RDS Radio Data System To Receive FM StationsWhat information can RDS signals provide? Operation ButtonsSearching for a Program By PTY Codes Switching to Broadcast Program Your Choice Temporarily CaseInfo NewsAffairs SportOperation Buttons Basic SettingsOperating Procedure YES ¶ For subwoofer¶ For front speakers, center speaker, and rear speakers Low frequency effect attenuator-LFE Basic SettingsSet the appropriate digital terminal setting Digital input Digital in terminals-DGTOn the display Auto surround-AUTO SRAuto mode-MODE Manual Select the source manuallyPress Control 3 or 2 to adjust Front speaker balance Sound AdjustmentsPress Adjust Adjustment itemsTone-BASS and Treble Adjusting sound from the remote controlFront speaker output balance -BAL balance DAP effect level-EFFECTDTS Digital Surround Creating Realistic Sound FieldsDolby Surround DAP Digital Acoustic Processor modesPossible × Impossible All Channel StereoReflections from behind Early reflections Direct sounds Selecting Surround Modes Activating Surround ModeCreating Realistic Sound Fields Adjust the speaker output levels as follows Adjusting Surround Mode Using Remote ControlAdjust the sound For using test tonePlayable Disc Types DVD Player OperationsDisc Information Discs you can play Disc TypeMenu-driven playback Disc structurePlayback Control function PBC DVD Player Operations Using the On-screen BarEx. When a DVD Video is played Meanings Available discsPress Enter Basic Operation through the On-screen BarPress on Screen twice Changing the Time IndicationFrom the DVD menu Locating a Desired Scene from Disc MenuPress TOP Menu or Menu From the VCD/SVCD menu with PBCPress Angle repeatedly to select the desired view angle Selecting a View Angle-ANGLEPress Angle Press and hold Angle for a few secondsSelecting the subtitle language Changing the Languages-SUBTITLEPress Audio repeatedly to select the desired audio language Selecting the audio channel Press AudioPress Audio repeatedly to select the desired audio channel ST 1 ST 2 L 1 R 1 L 2 RLocating a desired chapter/track- Chapter/Track Search Playing from a Specified Position on a DiscUse the number buttons 0-9 to enter the time Locating a desired position-Time SearchLocating a desired scene-DIGEST Press DigestPress cursor 5/∞/3/2 to move to the desired scene Special Picture Playback Changing the VFP setting-VFP Press cursor 3 or 2 repeatedly to select VFP modeRepeat steps 2 to 4 to adjust other parameters To adjust the appearance of the picturePlaying back in the desired order Program Playback and Random PlaybackRepeat to program the next steps Playing back tracks in random orderRepeating a desired part Repeat PlaybackRepeating a current title, chapter, or all Tracks Special Playback for DVD Audio Activating Surround modeAdditional Information for DVD Audio About indication on the front panelSelecting a still picture Press cursor ∞ or 5 repeatedly to select the desiredPress the number buttons to select a bonus group Playing back a bonus groupLoad an MP3 disc, then press MP3 Disc PlaybackBasic Operations Operations through the MP3 Control Screen Press RepeatLoad a Jpeg disc, then press Jpeg Disc PlaybackSlide-show Playback Operations through the Jpeg Control Screen Press Menu orOperation Buttons Configuration of Choice Menu Choice Menu OperationsPress cursor ∞ or 5 repeatedly To move to on Screen Press Enter to finish the settingPress Choice Press cursor ∞ or 5 repeatedly to select the desired optionPicture menu Choice Menu OperationsLanguage menu AutoJpeg Audio menuMP3 MAXSPK. Setting menu Others menu Select this to deactivate itSetting Parental Lock Restricting Playback by Parental LockReleasing Parental Lock temporarily Changing the setting of Parental LockNew setting is stored Country/Area codes list for Parental Lock Glossary for DVD Player Sound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerREW Operating Video ComponentsTV Return Release STANDBY/ON TV Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment Try to operate your TV by pressingRelease STANDBY/ON STB Using the number buttonsEnter the manufacturer’s code Try to operate your STB by pressingRelease STANDBY/ON VCR If there are more than one code listed for your brandOperating Other Manufacturers’ Equipment Try to operate your VCR by pressingCleaning the Unit MaintenanceCleaning Discs General NotesTroubleshooting GenaralFor DVD Player For MP3 TroubleshootingFor Tuner For JpegFM tuner IHF SpecificationsAmplifier AM tunerVictor Company of JAPAN, Limited 0702NHMMDWJEM