JVC RX-DV5RSL manual Maintenance, General Notes, Handling Discs, Cleaning Discs, Cleaning the Unit

Page 71

Maintenance

To get the best performance of the system, keep your discs and mechanism clean.

General Notes

In general, you will have the best performance by keeping your discs and mechanism clean.

Store discs in their cases, and keep them in cabinets or on shelves.

Handling Discs

Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

Do not touch the shiny surface of the disc, or bend the disc.

Put the disc back in its case after use to prevent warping.

Be careful not to scratch the surface of the disc when placing it back in its case.

Avoid exposure to direct sunlight, temperature extremes, and moisture.

Cleaning Discs

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

Cleaning the Unit

Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following.

DO NOT wipe it with a hard cloth.

DO NOT wipe it strong.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substances such as insecticides to it.

DO NOT allow any rubber or plastic to remain in contact with it for a long time.

68

Image 71
Contents RX-DV5RSL Important for Laser Products Above ALL Table of Contents Display Adjust button 27Parts Identification Front PanelPTY 9 and buttons Display button Remote ControlParts Identification Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories FM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionSpeaker Layout Diagram Connecting the SpeakersConnecting the subwoofer speaker Connecting the front, center, and rear speakersFor audio connections Connecting Audio/Video ComponentsAbout connecting cables/cords For Scart connectionsDigital connection Cassette deck/CD recorder connectionRGB Audio OUT Scart connectionVCR STB Audio VideoFor T-V Link VCRSTB Set Top Box For TV and video formatSelect the Source to Play Turn On the PowerAdjust the Volume Basic OperationsActivating TV Direct Turning Off the Power With the Sleep TimerTurning Off the Sounds Temporarily Changing the Display BrightnessBasic Operations Input modeOn the remote control When DVD is selected as the source, you can alsoChanging the Source Name Attenuating the Input SignalActivating the Recording Mode Input ATT indicatorStart Playback Basic DVD Player OperationsOpen the Disc Tray Load a DiscStop Playback Select Surround ModeTurn Off the Power into Standby Activate Realistic Sound FieldTuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode Operation Buttons Using the RDS Radio Data System To Receive FM StationsWhat information can RDS signals provide? Tuner OperationsSearching for a Program By PTY Codes Case Switching to Broadcast Program Your Choice TemporarilySport NewsAffairs InfoOperation Buttons Basic SettingsOperating Procedure YES ¶ For subwoofer¶ For front speakers, center speaker, and rear speakers Digital input Digital in terminals-DGT Basic SettingsSet the appropriate digital terminal setting Low frequency effect attenuator-LFEManual Select the source manually Auto surround-AUTO SRAuto mode-MODE On the displayAdjustment items Sound AdjustmentsPress Adjust Press Control 3 or 2 to adjust Front speaker balanceDAP effect level-EFFECT Adjusting sound from the remote controlFront speaker output balance -BAL balance Tone-BASS and TrebleDAP Digital Acoustic Processor modes Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundPossible × Impossible All Channel StereoReflections from behind Early reflections Direct sounds Selecting Surround Modes Activating Surround ModeCreating Realistic Sound Fields For using test tone Adjusting Surround Mode Using Remote ControlAdjust the sound Adjust the speaker output levels as followsDiscs you can play Disc Type DVD Player OperationsDisc Information Playable Disc TypesMenu-driven playback Disc structurePlayback Control function PBC Meanings Available discs Using the On-screen BarEx. When a DVD Video is played DVD Player OperationsChanging the Time Indication Basic Operation through the On-screen BarPress on Screen twice Press EnterFrom the VCD/SVCD menu with PBC Locating a Desired Scene from Disc MenuPress TOP Menu or Menu From the DVD menuPress and hold Angle for a few seconds Selecting a View Angle-ANGLEPress Angle Press Angle repeatedly to select the desired view angleSelecting the subtitle language Changing the Languages-SUBTITLEPress Audio repeatedly to select the desired audio language ST 1 ST 2 L 1 R 1 L 2 R Press AudioPress Audio repeatedly to select the desired audio channel Selecting the audio channelLocating a desired position-Time Search Playing from a Specified Position on a DiscUse the number buttons 0-9 to enter the time Locating a desired chapter/track- Chapter/Track SearchLocating a desired scene-DIGEST Press DigestPress cursor 5/∞/3/2 to move to the desired scene Special Picture Playback To adjust the appearance of the picture Press cursor 3 or 2 repeatedly to select VFP modeRepeat steps 2 to 4 to adjust other parameters Changing the VFP setting-VFPPlaying back tracks in random order Program Playback and Random PlaybackRepeat to program the next steps Playing back in the desired orderRepeating a desired part Repeat PlaybackRepeating a current title, chapter, or all Tracks About indication on the front panel Activating Surround modeAdditional Information for DVD Audio Special Playback for DVD AudioPlaying back a bonus group Press cursor ∞ or 5 repeatedly to select the desiredPress the number buttons to select a bonus group Selecting a still pictureLoad an MP3 disc, then press MP3 Disc PlaybackBasic Operations Press Repeat Operations through the MP3 Control ScreenLoad a Jpeg disc, then press Jpeg Disc PlaybackSlide-show Playback Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress cursor ∞ or 5 repeatedly to select the desired option Press Enter to finish the settingPress Choice Press cursor ∞ or 5 repeatedly To move to on ScreenAuto Choice Menu OperationsLanguage menu Picture menuMAX Audio menuMP3 JpegSPK. Setting menu Select this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockReleasing Parental Lock temporarily Changing the setting of Parental LockNew setting is stored Country/Area codes list for Parental Lock Glossary for DVD Player Tuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierREW Operating Video ComponentsTV Return Try to operate your TV by pressing Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment Release STANDBY/ON TVTry to operate your STB by pressing Using the number buttonsEnter the manufacturer’s code Release STANDBY/ON STBTry to operate your VCR by pressing If there are more than one code listed for your brandOperating Other Manufacturers’ Equipment Release STANDBY/ON VCRGeneral Notes MaintenanceCleaning Discs Cleaning the UnitGenaral TroubleshootingFor DVD Player For Jpeg TroubleshootingFor Tuner For MP3AM tuner SpecificationsAmplifier FM tuner IHFVictor Company of JAPAN, Limited 0702NHMMDWJEM