JVC RX-DV5RSL manual Others menu, Select this to deactivate it

Page 61

CROSS OVER

When you use a small speaker in any position, this unit automatically reallocates the bass sound elements assigned to the small speaker to the large speakers.

To use this function properly, set this crossover frequency level according to the size of the smallest speaker connected.

If you have selected “LRG (large)” or “LARGE” for all speakers, this function will not take effect.

Select one of the following settings:

120Hz : Select this frequency when the cone speaker unit built in the speaker is about 8 cm.

100Hz : Select this frequency when the cone speaker unit built in the speaker is about 10 cm.

80Hz : Select this frequency when the cone speaker unit built in the speaker is about 12 cm.

RETURN TO INITIAL

Select this to reset all speaker settings to the initial settings.

Select one of the following settings:

ON

:

Select this to activate this function.

OFF

:

Select this to deactivate it.

 

 

 

Subtitles (see page 39) and the information for zooming in (see pages 43 and 44) appear on the display even though this setting is “OFF.”

AUTO STANDBY

When the playback of the disc on the built-in DVD player ends and no operation is done for more than the selected time, the unit is turned off automatically.

This function takes effect only when DVD is selected as the source.

Select one of the following settings:

60: Select this to turn off the unit if no operation is done within 60 minutes.

30: Select this to turn off the unit if no operation is done within 30 minutes.

OFF : Select this to deactivate it.

7OTHERS menu

OTHERS

 

RESUME

ON

ON SCREEN GUIDE

ON

AUTO STANDBY

OFF

PARENTAL LOCK

 

RESUME

You can activate or deactivate the resume play function of the built-in DVD player.

Select one of the following settings:

ON

: Select this to activate this function.

OFF

: Select this to deactivate it.

 

 

ON SCREEN GUIDE

You can activate or deactivate the following on-screen guide icons:

For multi-view angles

:

 

 

 

 

For plural subtitles

:

 

 

 

 

For plural audio languages :

 

 

 

 

For playback status

:

,

,

1/8 ,

x 5 ,

 

 

etc.

 

 

 

The on-screen guide icons appear on the TV at the beginning of the playback with this function turned on.

When recording the picture with VCR, set “OFF” to avoid recording the indications above on your video tape.

The choice menu and on-screen bar can be recorded even though this function is set to “OFF.”

If Sleep Timer (see page 12) and Auto Standby are used at a time, one with the early shut-off time will turn off the unit.

PARENTAL LOCK

You can restrict playback of DVD VIDEO containing violent scenes and those not suitable for your family members.

You can select “PARENTAL LOCK” only before playback.

Select this to enter the PARENTAL LOCK submenu. (See pages 59 and 60.)

58

Image 61
Contents RX-DV5RSL Important for Laser Products Above ALL Table of Contents Parts Identification Adjust button 27Front Panel DisplayParts Identification Remote ControlPTY 9 and buttons Display button Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Getting Started Connecting the FM and AM AntennasAM antenna connection FM antenna connectionConnecting the subwoofer speaker Connecting the SpeakersConnecting the front, center, and rear speakers Speaker Layout DiagramAbout connecting cables/cords Connecting Audio/Video ComponentsFor Scart connections For audio connectionsDigital connection Cassette deck/CD recorder connectionVCR STB Audio Scart connectionVideo RGB Audio OUTSTB Set Top Box VCRFor TV and video format For T-V LinkAdjust the Volume Turn On the PowerBasic Operations Select the Source to PlayTurning Off the Sounds Temporarily Turning Off the Power With the Sleep TimerChanging the Display Brightness Activating TV DirectOn the remote control Input modeWhen DVD is selected as the source, you can also Basic OperationsActivating the Recording Mode Attenuating the Input SignalInput ATT indicator Changing the Source NameOpen the Disc Tray Basic DVD Player OperationsLoad a Disc Start PlaybackTurn Off the Power into Standby Select Surround ModeActivate Realistic Sound Field Stop PlaybackTuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode What information can RDS signals provide? Using the RDS Radio Data System To Receive FM StationsTuner Operations Operation ButtonsSearching for a Program By PTY Codes Case Switching to Broadcast Program Your Choice TemporarilyAffairs NewsInfo SportOperating Procedure Basic SettingsOperation Buttons ¶ For front speakers, center speaker, and rear speakers ¶ For subwooferYES Set the appropriate digital terminal setting Basic SettingsLow frequency effect attenuator-LFE Digital input Digital in terminals-DGTAuto mode-MODE Auto surround-AUTO SROn the display Manual Select the source manuallyPress Adjust Sound AdjustmentsPress Control 3 or 2 to adjust Front speaker balance Adjustment itemsFront speaker output balance -BAL balance Adjusting sound from the remote controlTone-BASS and Treble DAP effect level-EFFECTDolby Surround Creating Realistic Sound FieldsDTS Digital Surround DAP Digital Acoustic Processor modesReflections from behind Early reflections Direct sounds All Channel StereoPossible × Impossible Creating Realistic Sound Fields Activating Surround ModeSelecting Surround Modes Adjust the sound Adjusting Surround Mode Using Remote ControlAdjust the speaker output levels as follows For using test toneDisc Information DVD Player OperationsPlayable Disc Types Discs you can play Disc TypePlayback Control function PBC Disc structureMenu-driven playback Ex. When a DVD Video is played Using the On-screen BarDVD Player Operations Meanings Available discsPress on Screen twice Basic Operation through the On-screen BarPress Enter Changing the Time IndicationPress TOP Menu or Menu Locating a Desired Scene from Disc MenuFrom the DVD menu From the VCD/SVCD menu with PBCPress Angle Selecting a View Angle-ANGLEPress Angle repeatedly to select the desired view angle Press and hold Angle for a few secondsPress Audio repeatedly to select the desired audio language Changing the Languages-SUBTITLESelecting the subtitle language Press Audio repeatedly to select the desired audio channel Press AudioSelecting the audio channel ST 1 ST 2 L 1 R 1 L 2 RUse the number buttons 0-9 to enter the time Playing from a Specified Position on a DiscLocating a desired chapter/track- Chapter/Track Search Locating a desired position-Time SearchPress cursor 5/∞/3/2 to move to the desired scene Press DigestLocating a desired scene-DIGEST Special Picture Playback Repeat steps 2 to 4 to adjust other parameters Press cursor 3 or 2 repeatedly to select VFP modeChanging the VFP setting-VFP To adjust the appearance of the pictureRepeat to program the next steps Program Playback and Random PlaybackPlaying back in the desired order Playing back tracks in random orderRepeating a current title, chapter, or all Tracks Repeat PlaybackRepeating a desired part Additional Information for DVD Audio Activating Surround modeSpecial Playback for DVD Audio About indication on the front panelPress the number buttons to select a bonus group Press cursor ∞ or 5 repeatedly to select the desiredSelecting a still picture Playing back a bonus groupBasic Operations MP3 Disc PlaybackLoad an MP3 disc, then press Press Repeat Operations through the MP3 Control ScreenSlide-show Playback Jpeg Disc PlaybackLoad a Jpeg disc, then press Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress Choice Press Enter to finish the settingPress cursor ∞ or 5 repeatedly To move to on Screen Press cursor ∞ or 5 repeatedly to select the desired optionLanguage menu Choice Menu OperationsPicture menu AutoMP3 Audio menuJpeg MAXSPK. Setting menu Select this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockNew setting is stored Changing the setting of Parental LockReleasing Parental Lock temporarily Country/Area codes list for Parental Lock Glossary for DVD Player Operating Audio Components Operating JVC’s Audio/Video ComponentsSound control section Amplifier TunerTV Return Operating Video ComponentsREW Operating Other Manufacturers’ Equipment Changing the Preset Signal CodesRelease STANDBY/ON TV Try to operate your TV by pressingEnter the manufacturer’s code Using the number buttonsRelease STANDBY/ON STB Try to operate your STB by pressingOperating Other Manufacturers’ Equipment If there are more than one code listed for your brandRelease STANDBY/ON VCR Try to operate your VCR by pressingCleaning Discs MaintenanceCleaning the Unit General NotesGenaral TroubleshootingFor DVD Player For Tuner TroubleshootingFor MP3 For JpegAmplifier SpecificationsFM tuner IHF AM tunerVictor Company of JAPAN, Limited 0702NHMMDWJEM