JVC RX-DV5RSL manual Selecting the FM Reception Mode

7To tune in a preset station

On the front panel:

1 Press FM/AM to select the band.								FM/AM
The last received station of the selected band is								E
tuned in.
The CONTROL buttons now work for tuner
operations.
	ANALOG
	L	R	SPK.		AUTO	MUTING		VOLUME
								MHz
			Ex. : When selecting the FM band
2 Press CONTROL ∞ (or 5)							CONTROL
repeatedly until “< PRESET >”
appears on the display.
	ANALOG
	L	R	SPK.	TUNED STEREO	AUTO	MUTING		VOLUME
3 While “< PRESET >” still remains
on the display, press CONTROL 3							CONTROL
(or 2) to select a preset channel
number you want.
	ANALOG
	L	R	SPK.	TUNED STEREO	AUTO	MUTING		VOLUME
								MHz

•Pressing (or holding) CONTROL 3 increases the preset channel numbers.

•Pressing (or holding) CONTROL 2 decreases the preset channel numbers.

From the remote control:

1Press FM/AM.

“TUNER” appears on the operation mode display.

The last received station of the selected band is tuned in. The number buttons now work for tuner operations.

2Press the number buttons to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 30, press +10, +10, then 10.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station.

Before you start, remember...

There is a time limit in doing the following steps.

If the setting is canceled before you finish, start from step 1 again.

On the front panel:

1 While listening to an FM station,

press CONTROL ∞ (or 5)			CONTROL
repeatedly until “< FM MODE >”
appears on the display.
ANALOG
L R	SPK.	TUNED STEREO AUTO MUTING	VOLUME
			MHz
2 While “< FM MODE >” still remains
on the display, press CONTROL 3			CONTROL
(or 2) to select “MONO.”

•Each time you press the button, the FM reception mode alternates between “AUTO MUTING”* and “MONO.”

ANALOG

L	R	SPK.	TUNED STEREO AUTO MUTING
			VOLUME

MHz

AUTO MUTING MONO

*“AUTO MUTING” is the initial setting. If you have already changed the setting, “MONO” will be shown.

AUTO MUTING : Normally select this.

When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO	: Select this to improve the reception (but
	stereo effect will be lost).
	In this mode, you will hear noise while
	tuning into the stations. The AUTO
	MUTING indicator goes off from the
	display. (The STEREO indicator also goes
	off.)

To restore the stereo effect

Repeat step 1, then select “AUTO MUTING” in step 2.

From the remote control:

1Press FM/AM to select an FM station.

Number buttons now work for tuner operations.

2Press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”

18