JVC RX-DV5RSL Adjusting Surround Mode Using Remote Control, Adjust the sound, For using test tone

Adjusting Surround Mode

Using Remote Control

When playing back the source with Surround mode, you can adjust the speaker output levels for Surround modes.

Once you have adjusted the Surround modes, the adjustment is memorized for each source.

•You can also adjust Surround modes using the Choice menu (see pages 53 to 58) or buttons on the front panel (see page 24).

•When using test tone, you can adjust the speaker output levels without playback sounds.

Notes:

•You can adjust the speaker output levels for the activated speakers ONLY (the speaker indicators are lit on the display).

*You cannot adjust the output levels of center speaker when one of DAP modes is activated.

**You can adjust the effect level only when one of DAP modes is activated.

•Before operating the DVD player using remote control, press DVD to change the remote control operation mode to DVD.

1Select and play back software you like.

2Activate and select Surround mode.

•When 2-channel source is played back, you can select Surround modes.

3Adjust the sound.

		TV/STB CH
CONTROL	EFFECT	CENTER
	1	2	3
ANALOG	TEST	REAR·L
/DIGITAL
INPUT	4	5	6
AUDIO SURR ON/OFF		REAR·R
	7	8	9
SUBTITLE SURR MODE		– SUBWOOFER +
	10/0	+10	VFP
		100+	TV RETURN
			PROGRESSIVE

DIMMER

1)Press CONTROL repeatedly so that

“SOUND” appears on the operation mode

display.

Number buttons now work for the sound adjustment.

DVD AUDIO/VIDEO RECEIVER

2) Adjust the speaker output levels as follows:

To adjust center speaker, press CENTER +/–.*

To adjust left rear speaker, press REAR•L +/–.

To adjust right rear speaker, press REAR•R +/–.

To adjust subwoofer, press SUBWOOFER +/–.

To adjust the effect level, press EFFECT.**

The name for the item currently adjusted appears on the display. For details, see the illustrations of “Speaker output levels” on page 28.

For using test tone

1)Press CONTROL.

2)Press TEST.

The playback sound stops during playback.

“TEST L” starts flashing on the display and a test tone comes out of the speakers in the following order:

(Left front speaker)		(Center speaker)		(Right front speaker)
	(Left rear speaker)		(Right rear speaker)

3)Adjust the speaker output level as follows: To adjust center speaker, press CENTER +/–. To adjust left rear speaker, press REAR•L +/–. To adjust right rear speaker, press REAR•R +/–.

Notes:

•You cannot adjust the speaker output levels if you have set the speaker information to “NO.”

•No test tone comes out of the speaker when its speaker information is set to “NO.”

•When you press EFFECT or SUBWOOFER +/–, the test tone stops.

4)Press TEST to stop the test tone. The test tone stops.

•When no operation is done, the test tone stops automatically in about 1 minute.

Relation between Surround modes and adjustable items

						◯: Possible		×: Impossible
Mode	Item	TEST	CENTER	REAR•L	REAR•R		SUBWOOFER		EFFECT
Dolby Digital		◯	◯	◯	◯		◯		×
DTS Digital Surround		◯	◯	◯	◯		◯		×
Dolby Pro Logic II		◯	◯	◯	◯		◯		×
	DAP	◯	×	◯	◯		◯		◯
All Channel Stereo		◯	◯	◯	◯		◯		×

Note:

•You cannot adjust the speakers which are not used by the selected Surround mode.

32