JVC RX-DV5RSL manual Tuner Operations, Tuning into Stations Manually Using Preset Tuning

Tuner Operations

Tuning into Stations Manually Using Preset Tuning

On the front panel:

1 Press FM/AM to select the band.	FM/AM
The last received station of the selected band is
	E

tuned in.

The CONTROL buttons now work for tuner operations.

•Each time you press the button, the band alternates between FM and AM.

ANALOG
L	R	SPK.	AUTO MUTING
			VOLUME

MHz

Ex. : When selecting the FM band

2 Press CONTROL ∞ (or 5)

repeatedly until “< TUNING >”				CONTROL
appears on the display.
ANALOG
L	R	SPK.	AUTO	MUTING
				VOLUME
3 While “< TUNING >” still remains
on the display, press repeatedly or				CONTROL
hold CONTROL 3 (or 2) until you
find the frequency you want.
ANALOG
L	R	SPK.	TUNED STEREO AUTO	MUTING
				VOLUME
				MHz

•Pressing (or holding) CONTROL 3 increases the frequencies.

•Pressing (or holding) CONTROL 2 decreases the frequencies.

From the remote control:

1Press FM/AM.

“TUNER” appears on the operation mode display.

2Press repeatedly or hold TUNING 9 or ( until you find the frequency you want.

•Pressing (or holding) TUNING 9 increases the frequencies.

•Pressing (or holding) TUNING ( decreases the frequencies.

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.

7To store the preset stations

Before you start, remember...

There is a time limit in doing the following steps.

If the setting is canceled before you finish, start from step 2 again.

On the front panel ONLY:

1Tune into the station you want to preset (see “Tuning into Stations Manually”).

•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the

FM Reception Mode” on page 18.

ANALOG

L	R	SPK.	TUNED STEREO AUTO MUTING
			VOLUME

MHz

Ex. : When selecting the FM band

MEMORY

2 Press MEMORY.

The channel number position starts flashing on the display for about 5 seconds.

ANALOG
L	R	SPK.	TUNED STEREO AUTO MUTING
			VOLUME

MHz

3 Press CONTROL 3 (or 2) to select			CONTROL
a channel number while the channel
number position is flashing.
ANALOG
L R	SPK.	TUNED STEREO AUTO MUTING	VOLUME
			MHz

4Press MEMORY again while the selected MEMORY

channel number is flashing on the display.

The station is assigned to the selected channel number.

•The selected channel number stops flashing and then the

frequency starts flashing.

ANALOG

L	R	SPK.	TUNED STEREO AUTO MUTING
			VOLUME

MHz

Notes:

•When you hold and release CONTROL 3 (or TUNING 9 on the remote control) or CONTROL 2 (or TUNING ( on the remote control), the frequency keeps changing until a certain station is tuned in.

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

•When an FM stereo program is received, the STEREO indicator also lights up.

5Press CONTROL 3 (or 2) to select another frequency you want to store while the frequency is flashing on the display.

6Repeat steps 2 to 5 until you store all the stations you want.

To erase a stored preset station

Storing a new station on a used channel number erases the previously stored one.

17