JVC RX-DV5RSL manual SPK. Setting menu

Choice Menu Operations

7SPK. SETTING menu

SPK. SETTING

SIZE

LEVEL

DISTANCE

CROSS OVER 100Hz

RETURN TO INITIAL

¶SIZE

Select this to enter the SIZE submenu.

SIZE
FRONT SPEAKER	LARGE
CENTER SPEAKER	SMALL
REAR SPEAKER	SMALL
SUB WOOFER	NONE
RETURN

FRONT SPEAKER, CENTER SPEAKER, and

REAR SPEAKER

Select one of the following settings for each speaker:

LARGE (LRG) : Select this when the speaker size is relatively large.

SMALL (SML) : Select this when the speaker size is relatively small.

NONE (NO)	: Select this when you have not connected a
	speaker. (Not selectable for the front
	speakers)

SUBWOOFER

Select one of the following settings:

USE (YES) : Select this when a subwoofer is connected.

NONE (NO) : Select this when no subwoofer is used.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•Keep the following comment in mind as reference when adjusting speaker settings.

–If the size of the cone speaker unit built in your speaker is greater than 12 cm, select “LARGE,” and if it is smaller than 12 cm, select “SMALL.”

•If you have selected “SMALL” for the front speakers, you cannot select “LARGE” for the center and rear speakers.

•If you have selected “NONE” for subwoofer, you cannot select “SMALL” for the front speakers.

•You can take advantage of the speaker diagrams on the left part of the SPK. SETTING menu to set the speaker.

–The speaker diagram for the selected speaker is highlighted.

–The size of the speaker diagram is changed according to your setting.

Speaker diagrams

Front speakers

Center speaker

Subwoofer

Rear speakers

¶LEVEL

Select this to enter the LEVEL submenu.

LEVEL
CENTER SPEAKER	0 dB
LEFT REAR SPEAKER	0 dB
RIGHT REAR SPEAKER	0 dB
SUB WOOFER	–
TEST TONE
RETURN

CENTER SPEAKER, LEFT REAR SPEAKER, RIGHT REAR SPEAKER, and SUB WOOFER

Adjust the speaker output level within the range of –10 dB to +10 dB for each speaker in 1 step interval.

TEST TONE

Select this to start or stop test tone.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•When “NONE” is selected for the center speaker, rear speakers and/or subwoofer on the SIZE menu, “–” appears instead of the current setting. In this case, you cannot adjust the output level of those speakers.

•You can adjust the output level for center speaker and/or rear speakers only when one of proper Surround modes are activated (see page 31).

•When “NONE” is selected for the center and/or rear speakers, the test tone does not come out of those speakers.

¶DISTANCE

Select this to enter the DISTANCE submenu.

DISTANCE
FRONT SPEAKER	3.0m
CENTER SPEAKER	3.0m
REAR SPEAKER	3.0m
TEST TONE
RETURN

FRONT SPEAKER, CENTER SPEAKER, and

REAR SPEAKER

For each speaker, set the distance from the listening point within the range of 0.3 m to 9.0 m, in 0.3 m interval.

TEST TONE

Select this to start or stop test tone.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•When “NONE” is selected for the center speaker and rear speakers on the SIZE menu, “–” appears instead of the current setting.

In this case, you cannot adjust the speaker distance of those speakers.

•When “NONE” is selected for the center speaker and/or rear speakers on the SIZE menu, the test tone does not come out of those speakers.

57