ProForm PCTL99011 Next settings of the CD or video program, Speed, Will begin to move at 1.0 mph

Page 18

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on

the console. However, when the next “chirp” is heard, the speed and/or incline will change to

the next settings of the CD or video program.

To stop the walking belt at any time, press the Stop button on the console. The Time/Incline/ Segment Time display will begin to flash. To restart the program, press the Start button or the

Speed

▲ button. After a moment, the walking belt

will begin to move at 1.0 mph.

When the next

“chirp” is heard, the speed and incline will

 

change to the next settings of the CD or video

program

. The program can also be stopped by

pressing the Stop button on your CD player or VCR.

When the CD or video program is completed, the

walking belt will stop and the Tim e/Incline/Segment Time display will begin to flash. Note: To use an- other CD or video program, press the Stop button

or remove the key and go to step 1 on page 17.

Note: If the speed or incline of the treadmill does not change when a “chirp” is heard:

•Make sure that the iFIT.com indicator is lit and that the Time/Incline/Segment Time display is not flashing. If the Time/Incline/Segment Time display is flashing, press the Start button or the Speed ▲ button on the console.

•Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.

•Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.

•If you are using your portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

•See the instructions near the bottom of page

24.

Follow your progress with the LED track and

5 the displays.

See step 5 on page 10.

6 Measure your heart rate, if desired.

See step 6 on page 11.

7Whenkey. the program is completed, remove the

See step 7 on page 11.

CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player or VCR when you are finished using them.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents QUESTIONS? Model No. PCTL99011 Serial NoSerial Number Decal Table of Contents Important Precautions Use the treadmill only as described in this manualWear appropriate exercise clothes when Page Using the treadmill Before YOU BeginLeft Side Driver AssemblyAssembly requires two people Main in the UprightsTurn a Handrail Extension 34 so that the two larger HolesThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Grounded Outlet BoxConsole Diagram Features of the ConsoleTo reduce the possibility of electric shock HOW to Turn on the Power HOW to USE the Manual ModeDistance/Laps Display See page 20 and turn off the demo modeTime/Incline/Segment Speed/Min-Mile DisplayStart the program Select one of the personal trainer programsPress the Start button or the Speed Program displayIncline of the treadmill is at the lowest set When the program is completed, remove Key from the consoleFollow your progress with the displays Put on the chest pulse sensorWhen the program is completed, remove 7key from the console Enter your ageDecrease HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoCassettes Plug the adapter into the Line OUT jack on your stereo HOW to Connect Your Home StereoHOW to Connect Your Computer Plug the adapter into an RCA Y-adapter availableHOW to Connect Your VCR ProgramsWill begin to move at 1.0 mph Next settings of the CD or video programSpeed Or remove the key and go to onHOW to USE Programs Directly from OUR WEB Site Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Move the TreadmillYou raise the treadmill, make sure to lift with your legs HOW to Lower the Treadmill for USE Pin CatchProblem The power turns off during use Problem The power does not turn onSolution Switch is about 3 mm 1/8Belt has shifted to the left Problem The walking belt slows when walked onUnplug the Power Cord Changing, remove the keyWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Ordering Replacement Parts Limited Warranty Part No R0303AKey DescriptionDescription Qty Remove this Exploded Drawing and Part List from the Manual R0303A
Top Page Image Contents