ProForm PCTL99011 user manual Assembly requires two people, Driver, Main in the Uprights

Page 6

ASSEMBLY

Assembly requires two people.		Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.			Assembly requires your own Phillips screw-
driver	and rubber mallet	.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1.With the help of a second person, carefully raise the treadmill to the upright position as shown.

Insert one of the Extension Legs (55) into the treadmill as shown. Make sure that the Extension Leg is turned so

the Base Pad (44) is on the bottom. If necessary, tip the Uprights (64) forward as you insert the Extension Leg.

Insert the other Extension Leg (not shown) in the same way.

If there are plastic ties on the Pulse Sensors (54), remove them.

2.With the help of a second person, carefully lower the Uprights (64) as shown. Note: It may be helpful to place your foot on one of the Wheels (58) as you tip the Uprights. Make sure that the Extension Legs (55) re-

main in the Uprights.

Attach each Extension Leg (55) with two Extension Screws (35) as shown.

Note: One replacement Base Pad (44) may be included. If a Base Pad becomes worn and needs to be replaced, use the replacement Base Pad.

	1
		54
		Plastic Ties
		64
		55
		44
	2	44
		35
		55
	64	44
	64	35
		35
		55
	58	44

6

Image 6

Contents QUESTIONS? Model No. PCTL99011 Serial NoSerial Number Decal Table of Contents Important Precautions Use the treadmill only as described in this manualWear appropriate exercise clothes when Page Using the treadmill Before YOU BeginLeft Side Driver AssemblyAssembly requires two people Main in the UprightsTurn a Handrail Extension 34 so that the two larger HolesThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Grounded Outlet BoxConsole Diagram Features of the ConsoleTo reduce the possibility of electric shock HOW to Turn on the Power HOW to USE the Manual ModeDistance/Laps Display See page 20 and turn off the demo modeTime/Incline/Segment Speed/Min-Mile DisplayStart the program Select one of the personal trainer programsPress the Start button or the Speed Program displayIncline of the treadmill is at the lowest set When the program is completed, remove Key from the consoleFollow your progress with the displays Put on the chest pulse sensorWhen the program is completed, remove 7key from the console Enter your ageDecrease HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoCassettes Plug the adapter into the Line OUT jack on your stereo HOW to Connect Your Home StereoHOW to Connect Your Computer Plug the adapter into an RCA Y-adapter availableHOW to Connect Your VCR ProgramsWill begin to move at 1.0 mph Next settings of the CD or video programSpeed Or remove the key and go to onHOW to USE Programs Directly from OUR WEB Site Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Move the TreadmillYou raise the treadmill, make sure to lift with your legs HOW to Lower the Treadmill for USE Pin CatchProblem The power turns off during use Problem The power does not turn onSolution Switch is about 3 mm 1/8Belt has shifted to the left Problem The walking belt slows when walked onUnplug the Power Cord Changing, remove the keyWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Ordering Replacement Parts Limited Warranty Part No R0303AKey DescriptionDescription Qty Remove this Exploded Drawing and Part List from the Manual R0303A