For video tutorials on how to change the batteries, go to http://www.polar.com/en/polar_community/videos.
Danger of explosion if the battery is replaced with wrong type.
Power Save Mode
The power save mode is enabled by default. It has the following effects on your training computer usage:
1.Power save mode during the day During the hours of 06:00 and 24:00 / 6:00am to 12:00pm, the power save mode will be activated, if you have not pressed any of the buttons for five minutes. The time shown on the display will change smaller and the AutoSync function is disabled. To exit the power save mode, press any button.
The power save mode will not be enabled during training session recording.
2.Power save mode during the night During the night, in between the hours 24:00 - 06:00 / 12:00am - 06:00am, the training computer display will be switched off automatically. During this time the AutoSync function is not enabled. To exit the power save mode, press any button. After five minutes, the display returns to power save mode.
The time period during which the power save mode is enabled, can be modified in the WebSync software, to better suit your training schedule. For more information, see WebSync Help.
Battery Lifetime
The battery lifetime for the RCX5 training computer is on average 11 months and depends on which features and sensors you use. The below suggestions will help you to lengthen the battery lifetime.
•AutoSync function off.
•Do not use the GPS sensor when you don't need speed, distance or location data.
ENGLISH 19