English
Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off (Standby)
On the front panel:
STANDBY
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on the display.
Current source name appears
POWER
Current volume level is shown here
To turn off the power (into standby mode), | STANDBY |
press POWER again.
The STANDBY lamp lights up. A small amount POWER of power is consumed in standby mode. To turn
DVD | Select the DVD player for viewing the stereo |
| digital video disc. |
TV SOUND/DBS | Select the TV sound (or the DBS tuner). |
VCR | Select the video component connected to the |
| VCR jacks. |
CD * | Select the CD player. |
TAPE/MD * | Select the cassette deck (or the MD recorder). |
PHONO * | Select the turntable. |
FM/AM * | Select an FM or AM broadcast. |
the power off completely, unplug the AC power cord.
•Each time you press the button, the band alternates between FM and AM.
From the remote control: | AUDIO |
Notes:
To turn on the power, press AUDIO POWER. The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display.
•When connecting an MD recorder (to the TAPE/MD jacks) or a DBS tuner (to the TV SOUND/DBS jacks), change the source name that appears on the display. See page 11 for details.
•When you press one of the source selecting buttons on the remote control marked above with an asterisk (*), the receiver automatically turns on.
To turn off the power (into standby mode),
press AUDIO POWER again. The STANDBY lamp lights up.
Selecting the Source to Play
Press one of the source selecting buttons.
On the front panel:
DVD | TV SOUND/DBS | VCR |
|
| SOURCE NAME |
|
|
CD | TAPE/MD | PHONO | FM/AM |
| SOURCE NAME |
|
|
From the remote control:
DVD TVSOUND/DBS VCR
CD | PHONO |
Signal and speaker indicators on the display
•The signal indicators light up to indicate the incoming channel signals.
– Only the indicators for the incoming signals light up. (When analog input is selected, “L” and “R” always light up.)
•The frame of the signal indicator (except for “LFE”: See notes below) lights up if the corresponding speaker is set to “LARGE” or “SMALL” (for subwoofer, “YES”).
L C R
SUBWFR LFE
LS S RS
L:Light up when the left front channel signal comes in. The frame of this signal indicator always lights up.
R:Light up when the right front channel signal comes in.
The frame of this signal indicator always lights up.
C:Light up when the center channel signal comes in. LS: Light up when the left rear channel signal comes in. RS: Light up when the right rear channel signal comes in.
S:Light up when the monaural rear channel signal comes in. LFE: Light up when the LFE channel signal comes in.
Notes:
TAPE/MD | FM/AM | • When the LFE channel signal comes in, “LFE” lights up. |
•When “SUBWOOFER” is set to “YES,” (See page 15) SUBWFR lights up.
8