English, Press and hold VCR POWER 2.Press VCR

English

To change the transmittable signals for	To change the transmittable signals for
operating another manufacturer’s VCR	operating a CATV converter or satellite tuner

2.Press VCR.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a PANASONIC product, press 0, then 7. For a MITSUBISHI product, press 1, then 3.

4. Release VCR POWER.

Following button can be used for operating the VCR:

VCR POWER: Turns on and off the VCR.

After pressing VCR, you can perform the following operations on the VCR:

VCR CH +/–:	Changes the TV channels on the VCR.
3:	Starts playback.
1:	Rewinds a video tape.
Á:	Fast winds a video tape.
7:	Stops operation.
8:	Pauses. To resume playing, press 3.
REC PAUSE:	Pauses recording temporarily.

Note:

Refer to the manual supplied with your VCR.

5. Try to operate your VCR by pressing VCR POWER.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of VCR,

try each one until the correct one is entered.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

1.Press and hold CATV/SAT POWER.

2.Press CATV CONTROL.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a JVC product, press 1, then 4.

For a SONY product, press 2, then 0.

4. Release CATV/SAT POWER.

Following button can be used for operating the CATV converter or the satellite tuner:

CATV/SAT POWER: Turns on and off the CATV converter or satellite tuner.

After pressing CATV CONTROL, you can perform the following operations on the equipment:

CATV CH +/–:	Changes the channels.
1 – 9, 0, 100+ (+10):	Selects the channel.
	100+ (+10) button will function as the
	ENTER button if your equipment
	requires pressing ENTER after
	selecting a channel number.
RETURN:	Alternates between previously selected
	channel and the current channel.

Note:

Refer to the manual supplied with your CATV converter or satellite

tuner.

5. Try to operate your CATV converter or satellite tuner by pressing CATV/SAT POWER.

When your CATV converter or satellite tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or satellite tuner, try each one until the correct one is entered.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.