JVC RX-6100VBK Operating Other Manufacturers’ Video Equipment, buttons 1-9,and, Release TV POWER

Operating Other Manufacturers’ Video Equipment

This remote control supplied with the receiver can transmit control signals for other manufacturers’ VCRs, TVs, CATV converters and satellite tuners. By changing the transmittable signals from preset ones to the other manufacturers’, you can operate the other manufacturer’s components using this remote control.

When operating the other manufacturers’ components, refer also to the manuals supplied with them. To operate these components with the remote control, first you need to set the manufacturer’s code each for VCR, TV, CATV converters, and satellite tuner.

POWER

CATV/ SAT	TV	VCR	AUDIO
DVD TVSOUND/DBS		VCR	SLEEP
CD	ANALOG/DIGITAL		PHONO
TAPE/MD			FM/AM
	3
	8
RECPAUSE			CATV
	7		CONTROL
SURROUND			SOUND
SURROUND	CATV CH	VCR CH	CD-DISC
MODE
SUBWOOFER		CNTR
1	2	3	4
REAR•L		REAR•R
5	6	7/P	8
EFFECT	TEST	MENU	ENTER
9	0	10	+10
TV/VIDEO		RETURN	100+
MUTING	TV CH	TV VOL	VOLUME

RM-SRX6500J REMOTE CONTROL

To change the transmittable signals for operating another manufacturer’s TV

1.Press and hold TV POWER.

2.Press TV SOUND/DBS.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a JVC product, press 0, then 1.

For a Toshiba product, press 0, then 8.

4. Release TV POWER.

The following buttons can be used for operating the TV:

TV POWER: Turns on and off the TV.

TV VOL +/–:Adjusts the volume.

TV/VIDEO: Sets the input mode (either TV

or VIDEO).

After pressing TV SOUND/DBS, you can perform the following operations on the TV:

TV CH +/–:	Changes the channels.
1 – 9, 0, 100+ (+10): Selects the TV channels.
	100+ (+10) button will function as
	the ENTER button if your TV requires
	pressing ENTER after selecting a
	channel number.
RETURN:	Alternates between the previously
	selected channel and the current channel.

Note:

Refer to the manual supplied with your TV.

5. Try to operate your TV by pressing TV POWER.

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

Manufacturer	Code	Manufacturer	Code
Hitachi	10	Samsung	12
JVC	01	Sanyo	13
Magnavox	02	Sony	07
Mitsubishi	03	Sharp	06
Panasonic	04, 11	Toshiba	08
RCA	05	Zenith	09

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

English

31