JVC RX-6100VBK manual English, FM tuner IHF, AM tuner, General

Page 37
FM tuner (IHF)

FM tuner (IHF)

Tuning Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal-to-Noise Ratio (IHF-A weighted):

Total Harmonic Distortion:

Stereo Separation at REC OUT:

Alternate Channel Selectivity:

Frequency Response:

AM tuner

Tuning Range:

Usable Sensitivity:

Signal-to-Noise Ratio:

General

Power Requirements:

Power Consumption:

Dimensions (W x H x D):

Mass:

87.5 MHz to 108.0 MHz

 

Monaural:

12.8 dBf (1.2 µV/75

Ω)

Monaural:

21.3 dBf (3.2 µV/75

Ω)

Stereo:

41.3 dBf (31.5 µV/75

Ω)

Monaural:

78 dB at 85 dBf

 

Stereo:

73 dB at 85 dBf

 

Monaural:

0.4% at 1 kHz

 

Stereo:

0.6% at 1 kHz

 

35 dB at 1 kHz

45 dB: (±400 kHz)

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

530 kHz to 1,710 kHz

Loop antenna

400 µV/m

 

50 dB (100 mV/m)

AC 120V AM tuner, 60 Hz

290 W/390 VA (at operation)

2 W (in standby mode)

435 mm x 146 mm x 403.5 mm (17 3/16 in. x 5 3/4 in. x 15 15/16 in.)

10.2 kg (22.5 lbs)

Designs & specifications are subject to change without notice.

English

35

Image 37
Contents POWER POWERRX-6100VBK AUDIO/VIDEO CONTROL RECEIVERAttention --Commutateur POWER Caution --POWER switchWarnings, Cautions and Others For Canada/pour le CanadaEnglish Table of ContentsBasic Settings Using the DSP ModesEnglish Parts IdentificationConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers Connecting the rear and center speakersConnecting the subwoofer speaker Connecting Audio/Video ComponentsEnglish CD playerEnglish Video component connectionsTV and/or DBS tuner outputPutting Batteries in the Remote Control Connecting the Power CordEnglish Digital connectionsBasic Operations Turning the Power On and Off StandbyFrom the remote control From the remote controlMuting the Sound Selecting the Front SpeakersAdjusting the Volume From the remote controlAttenuating the Input Signal Adjusting the Subwoofer Output LevelAdjusting the Tone Reinforcing the BassAdjusting the Front Speaker Output Balance Basic SettingsRecording a Source Changing the Source Name1. Press SETTING repeatedly until Setting the Speakers for the DSP ModesEnglish English 1. Press SETTING repeatedly untilSelecting the Analog or Digital Input Mode Digital Input DIGITAL IN Terminal Setting1. Press SETTING repeatedly until EnglishStoring the Basic Settings and Setting the Subwoofer InformationAdjustments - One Touch Operation Using the Sleep TimerUsing Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts EnglishPress MULTI CURSOR %/ Þ EnglishEnglish Using the DSP Modes3D-PHONICmodes DAP modesHEAD PHONE mode EnglishSurround modes Dolby Surround Dolby Digital and Dolby Pro LogicAvailable DSP modes EnglishBy pressing DSP MODE By pressing SURROUND MODEAdjusting the DAP Modes and HEAD PHONE mode Adjusting the 3D-PHONICModesFrom the remote control EnglishEnglish Adjusting the Surround Modes1. Press SURROUND MODE English 4.Adjust the speaker output levelsDSP EFFECT EnglishDSP EFFECT DSP EFFECTEnglish Activating the DSP Modes1. Press SURROUND so that the English COMPU LINK Remote Control SystemEnglish AV COMPU LINK Remote Control SystemCONNECTIONS CONNECTIONSS-videoplug EnglishEnglish Operating JVC’s Audio/Video ComponentsSound control section Amplifier TurntableCD player-changer EnglishCassette deck MD recorder1.Press and hold TV POWER 2.Press TV SOUND/DBS Operating Other Manufacturers’ Video Equipment3.Enter manufacturer’s code two digits using 4. Release TV POWEREnglish 1.Press and hold VCR POWER 2.Press VCRPROBLEM TroubleshootingSOLUTION EnglishEnglish Specifications40 Hz to 20 kHz with no more than 0.8% total harmonic distortionFM tuner IHF EnglishAM tuner GeneralJ C 0200HIMMDWJEIN EN, FRVICTOR COMPANY OF JAPAN, LIMITED