JVC RX-6100VBK manual English, CD player-changer, Cassette deck, MD recorder, DVD player

Page 32
CD player-changer

English

CD player-changer

After pressing CD-DISC, you can perform the following operations on a CD player-changer:

3:

Starts playing.

4:

Returns to the beginning of the current (or previous)

¢:

track.

Skips to the beginning of the next track.

7:

Stops playing.

8:

Pauses playing. To release it, press 3.

1 – 6, 7/P:

Selects the number of a disc installed in a CD

 

player-changer.

After pressing CD, you can perform the following operations on the CD player-changer:

1 – 10, +10: Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301),

you can do the following operations using the number buttons after pressing CD.

1.Select a disc number.

2.Then select a track number (always enter two digits).

3.Start playback.

EXAMPLES:

•Selecting disc number 3, track number 2, and start playback. Press 3, then, 0, 2, then 3.

•Selecting disc number 10, track number 5, and start playback. Press 1, 10, then, 0, 5, then 3.

•Selecting disc number 105, track number 12, and start playback. Press 1, 10, 5, then 1, 2 then 3.

IMPORTANT:

To operate JVC’s video components using this remote control:

•You need to connect JVC video components through the AV COMPU LINK terminals (see page 27) in addition to the connections using cables with RCA pin plugs (see page 6).

•Some JVC VCRs can accept two types of the control signals — remote code “A” and “B.” Before using this remote control, make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”

•When using the remote control:

–For the DVD player and VCR operations, aim the remote control directly at the remote sensor on each component, not on the receiver.

–For the TV operations:

7If the TV has the AV COMPU LINK terminal “RECEIVER/AMP,” aim the remote control directly at the remote sensor on the receiver.

7If the TV has the AV COMPU LINK terminal “AV COMPU LINK EX,” aim the remote control directly at the remote sensor on the TV.

VCR

You can always perform the following operations:

VCR POWER: Turns on or off the VCR.

After pressing VCR, you can perform the following operations on the VCR:

1 – 9, 0:

Selects the TV channels on VCR.

3:

Starts playing.

1:

Rewinds a tape.

Á:

Fast winds a tape.

7:

Stops operations.

8:

Pauses playing. To release it, press 3.

REC PAUSE:

Pauses recording temporarily. To release it press 3.

VCR CH +/–:

Changes the TV channels on the VCR.

Cassette deck

After pressing TAPE/MD, you can perform the following operations on a cassette deck:

3:

Starts playing.

1:

Fast winds the tape from right to left.

Á:

Fast winds the tape from left to right.

7:

Stops operations.

8:

Pauses playing. To release it, press 3.

REC PAUSE: Pauses recording temporarily. To release it press 3.

Note:

Before starting the above operations, make sure that you have

changed the source name correctly. See page 11.

MD recorder

After pressing TAPE/MD, you can perform the following operations on the MD recorder:

3:

Starts playing.

4:

Returns to the beginning of the current (or previous)

¢:

track.

Skips to the beginning of the next track.

7:

Stops playing.

8:

Pauses playing. To release it, press 3.

REC PAUSE: Pauses recording temporarily. To release it press 3.

Note:

Before starting the above operations, make sure that you have

changed the source name correctly. See page 11.

DVD player

After pressing DVD, you can perform the following operations on a DVD player:

3:

Starts playing.

 

 

 

4:

Returns to the beginning of the current (or

¢:

previous) track.

 

 

 

Skips to the beginning of the next track.

 

7:

Stops playing.

 

 

 

8:

Stops playing temporarily. To release it, press 3.

 

 

 

 

 

 

After pressing DVD, these buttons

 

 

 

 

can be used for the DVD menu

 

 

 

 

operations.

 

 

3

 

 

 

 

 

 

 

Note:

 

 

 

REAR•R

 

 

 

 

 

 

6

7/P

8

 

For detailed menu operations, refer to the

MENU

ENTER

 

10

+10

 

instructions supplied with the discs or the

 

 

 

 

DVD player.

TV

You can always perform the following operations:

TV POWER: Turns on or off the TV.

TV/VIDEO: Sets the input mode (either TV or VIDEO).

TV VOL +/–: Adjusts the volume.

TV CH +/–: Changes the channels.

RETURN: Alternates between the previously selected channel and the current channel.

1 – 9, 0, 100+: Selects the channels.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents POWER POWERRX-6100VBK AUDIO/VIDEO CONTROL RECEIVERCaution --POWER switch Attention --Commutateur POWERWarnings, Cautions and Others For Canada/pour le CanadaTable of Contents EnglishBasic Settings Using the DSP ModesParts Identification EnglishBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerEnglish CD playerVideo component connections EnglishTV and/or DBS tuner outputConnecting the Power Cord Putting Batteries in the Remote ControlEnglish Digital connectionsTurning the Power On and Off Standby Basic OperationsFrom the remote control From the remote controlSelecting the Front Speakers Muting the SoundAdjusting the Volume From the remote controlAdjusting the Subwoofer Output Level Attenuating the Input SignalAdjusting the Tone Reinforcing the BassBasic Settings Adjusting the Front Speaker Output BalanceRecording a Source Changing the Source NameEnglish Setting the Speakers for the DSP Modes1. Press SETTING repeatedly until 1. Press SETTING repeatedly until EnglishDigital Input DIGITAL IN Terminal Setting Selecting the Analog or Digital Input Mode1. Press SETTING repeatedly until EnglishSetting the Subwoofer Information Storing the Basic Settings andAdjustments - One Touch Operation Using the Sleep TimerTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts EnglishEnglish Press MULTI CURSOR %/ ÞUsing the DSP Modes English3D-PHONICmodes DAP modesEnglish HEAD PHONE modeSurround modes Dolby Surround Dolby Digital and Dolby Pro LogicEnglish Available DSP modesBy pressing DSP MODE By pressing SURROUND MODEAdjusting the 3D-PHONICModes Adjusting the DAP Modes and HEAD PHONE modeFrom the remote control English1. Press SURROUND MODE Adjusting the Surround ModesEnglish 4.Adjust the speaker output levels EnglishEnglish DSP EFFECTDSP EFFECT DSP EFFECT1. Press SURROUND so that the Activating the DSP ModesEnglish COMPU LINK Remote Control System EnglishAV COMPU LINK Remote Control System EnglishCONNECTIONS CONNECTIONSEnglish S-videoplugOperating JVC’s Audio/Video Components EnglishSound control section Amplifier TurntableEnglish CD player-changerCassette deck MD recorderOperating Other Manufacturers’ Video Equipment 1.Press and hold TV POWER 2.Press TV SOUND/DBS3.Enter manufacturer’s code two digits using 4. Release TV POWER1.Press and hold VCR POWER 2.Press VCR EnglishTroubleshooting PROBLEMSOLUTION EnglishSpecifications English40 Hz to 20 kHz with no more than 0.8% total harmonic distortionEnglish FM tuner IHFAM tuner GeneralVICTOR COMPANY OF JAPAN, LIMITED EN, FRJ C 0200HIMMDWJEIN
Top Page Image Contents