Adjusting the 3D-PHONIC Modes
Once you have adjusted the
Before you start, remember...
•Make sure that you have set the speaker information correctly (see page 12).
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel:
DSP MODE
1. Press DSP MODE repeatedly until “3D ACTION” or “3D THEATER” appears on the display.
The
2. Adjust the effect level. | ADJUST |
|
1) Press ADJUST repeatedly until “DSP
EFFECT” appears on the display.
•Once you have pressed ADJUST, MULTI CURSOR %/ Þ can be also used for selecting “DSP EFFECT.”
•The display changes to show the current setting.
2) Press MULTI CURSOR @/ # to | MULTI CURSOR |
|
select the effect level.
• As you press it, the effect level changes as follows:
DSP EFFECT 1
DSP EFFECT 2 
DSP EFFECT 3 
DSP EFFECT 5 | DSP EFFECT 4 | |
As the number increases, the selected | ||
becomes stronger. |
|
|
From the remote control: |
|
|
1. Press SURROUND MODE | SURROUND | |
MODE | ||
repeatedly until “3D ACTION” or “3D THEATER” appears on the display.
Adjusting the DAP Modes and HEAD PHONE mode
Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.
Before you start, remember...
•Make sure that you have set the speaker information correctly (see page 12).
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•You cannot adjust the rear speaker output level when you have set “REAR SPK” to “NONE.” See page 12.
•You cannot make any adjustment for the HEAD PHONE mode.
On the front panel:
DSP MODE
1. Press DSP MODE repeatedly until the DAP mode — LIVE CLUB, DANCE CLUB, HALL, or PAVILION — or HEAD PHONE appears on the display.
The DSP indicator also lights up on the display. (When the HEAD PHONE is selected, HEAD PHONE indicator lights up, instead of the DSP indicator.)
•When you have set “REAR SPK” to “NONE,” the 3D- PHONIC indicator also lights up. (Except for “HEAD PHONE.”)
2.Adjust the speaker output levels.
1) Press ADJUST repeatedly until one of | ADJUST |
the following indications appears on |
|
the display. |
|
“REAR L LEVEL”:
To adjust the left rear speaker level. “REAR R LEVEL”:
To adjust the right rear speaker level.
• Once you have pressed ADJUST, MULTI CURSOR %/ Þ can be also used for selecting the speaker.
2) Press MULTI CURSOR @/ # to
MULTI CURSOR
adjust the selected speaker output level (from
3) Repeat 1) and 2) to adjust the other speaker output level.
English
The
2. | Press SOUND. |
|
| SOUND | ||
|
|
| ||||
| The 10 keys are activated for sound adjustments. | |||||
3. | Press EFFECT to select an effect |
| EFFECT | |||
| level you want. |
| 9 | |||
| • Each time you press the button, the effect |
|
| |||
| level changes as follows: |
|
|
| ||
| DSP EFFECT 1 |
| DSP EFFECT 2 |
| DSP EFFECT 3 | |
|
|
| ||||
| DSP EFFECT 5 | DSP EFFECT 4 | ||||
3.Adjust the effect level.
1)Press ADJUST repeatedly until “DSP EFFECT” appears on the display.
•Once you have pressed ADJUST, MULTI CURSOR % / Þ can be also used for selecting “DSP EFFECT.”
•The display changes to show the current setting.
2)Press MULTI CURSOR @/ # to select the effect level.
•As you press it, the effect level changes as follows:
ADJUST
MULTI CURSOR
As the number increases, the selected
DSP EFFECT 1
DSP EFFECT 2 
DSP EFFECT 3 
DSP EFFECT 5 | DSP EFFECT 4 |
As the number increases, the selected DAP mode becomes stronger.
21