JVC RX-7000RBK manual Digital connections, Digital input terminals, Digital output terminal

Page 11

Digital connections

This receiver is equipped with three DIGITAL IN terminals — one digital coaxial terminal and two digital optical terminals, and one DIGITAL OUT terminal.

You can connect any digital equipment such as —

•DBS tuner,

•Digital TV broadcast tuner,

•DVD player,

•CD player,

•and MD recorder.

IMPORTANT:

•When connecting the DVD player, digital TV broadcast tuner or DBS tuner using the digital terminals, you also need to connect it to the video jack (either composite video terminal or S-video terminal) on the rear. Without connecting it to the video jack, you can view no playback picture.

•After connecting the components using the DIGITAL IN terminals, set the following correctly if necessary.

–Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “Digital Input (DIGITAL IN) Terminal Setting” on page 16.

–Select the digital input mode correctly. For details, see “Selecting the Analog or Digital Input Mode” on page 16.

Digital input terminals

DBS tuner

DVD player

DBS

DVD

 

 

CD player

 

 

MD recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital coaxial cable (not supplied) between digital coaxial terminals

Digital optical cable (not supplied) between digital optical terminals

Notes:

•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components.

–DIGITAL 1 (coaxial): For DVD player

–DIGITAL 2 (optical): For CD player

–DIGITAL 3 (optical): For digital TV broadcast tuner

•When you want to operate the CD player or MD recorder using the COMPU LINK remote control system, connect the target component also as described in “Analog connections” (see page 6).

•When you want to operate the DVD player using the AV COMPU LINK remote control system, connect the DVD player also as described in “Analog connections” (see page 7).

Digital output terminal

MD recorder, etc.

Digital optical cable (not supplied) between digital optical terminals

When the digital recording equipment such as an MD recorder has a digital optical input terminal,

connecting it to the DIGITAL OUT

 

DIGITAL OUT

 

 

 

 

 

 

terminal enables you to perform

 

 

 

 

 

digital-to-digital recording.

PCM/DOLBY DIGITAL/MPEG/DTS

English

When the component has a digital coaxial output terminal, connect it to the DIGITAL 1 (DVD) terminal, using the digital coaxial cable (not supplied).

When the component has a digital optical output terminal, connect it to the DIGITAL 2 (CD), or DIGITAL 3 (TV) terminal, using the digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

DIGITAL IN

PCM / DOLBY DIGITAL

MPEG/ DTS

DIGITAL 1 (DVD)

DIGITAL 2 (CD)

DIGITAL 3 (TV)

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RX-7000RBK Achtung -- STANDBY/ON -Schalter Per I’ltaliaEspañol Italiano Table of Contents Front Panel Remote ControlParts Identification Getting Started Before InstallationChecking the Supplied Accessories Connecting the FM and AM MW/LW AntennasAM MW/LW Antenna Connections Connecting the SpeakersBasic connecting procedure Connecting the front speakersAbout the speaker impedance Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVideo component connections CD playerCassette deck or MD recorder DBS tuner TV and/or DBS tunerDVD player DVD playerDigital output terminal Digital connectionsDigital input terminals R6PSUM-3/AA15F Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning the Power On and Off StandbyFrom the remote control Basic OperationsTurn Source Selector to Adjusting the VolumeSelecting the Front Speakers EtcReinforcing the Bass Attenuating the Input SignalAdjusting the Subwoofer Output Level Muting the SoundRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Setting the Subwoofer InformationRear Delay appears on Display Setting the Speakers for the DSP ModesPress Setting repeatedly until Low frequency effect attenuator Level Crossover FRQ Crossover Frequency appears on the displayTurn Multi JOG to select LFE ATT Low Frequency Effect Attenuator appears on DisplaySelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingShowing the Text Information on Display Press ONE Touch OPERATION. Onetouchoperation Adjust the sound using the functions listed aboveUsing the Sleep Timer Receiving Radio Broadcasts Using Preset TuningTuning in Stations Manually Selecting the FM Reception Mode Assigning Names to Preset StationsListening to an FM station Using the RDS Radio Data System to Receive FM StationsSearching for a Program by PTY Codes Press PTY Search whilePTY codes Turn Multi JOG until the PTYPress PTY Search while listening to an FM station Press TA/NEWS/INFO until Switching to a Broadcast Program of Your Choice TemporarilyPress EON so that the last selected Program type appears on DisplayPress SEA Adjust repeatedly Using the SEA ModesSelecting Your Favorite SEA Mode Creating Your Own SEA ModeDAP modes Using the DSP Modes3D-PHONIC modes Surround modes DVD Multi Playback ModeFront By pressing DSP Mode By pressing Surround ModeAvailable DSP Modes According to the Speaker Arrangement Available DSP modesAdjusting the DAP Modes Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes Repeatedly until Theater Appears on the display JVC Theater Surround adjustmentsPress Test again to stop the test tone. Test Select and play a sound source To cancel the Dolby/DTS/MPEG Surround modeTheater appears on Display Activating the DSP ModesFor the other DSP modes Repeatedly until the DSP mode youTo cancel the DSP mode Want appears on the displayMulti appears on the display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Press DVD Multi so that DVDUsing the On-Screen Menus To BAL. Balance Press @/ #to adjustInput Attenuator mode Press %/ Þto move to Sound CONTROL, then press @/ #Press %/ Þto move To SEA, then press To SEA ModeTo Surround LEVEL, then press @/ #Set or adjust, then press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Usermode Press %/ Þto move to SETTING, then Press @/ #Press %/ Þ / @/ #to Move in front of a character you want Press %/ Þto move to Preset Name Then press SETTo Preset Press %/ Þto move to Tuner CONTROL, then press @/ #Automatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Same timeDisc Title Input Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerDisc Information screen appears on the TV Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen To exit from the Disc information screenPress SET again Press Text Display while CD is selected as the sourcePress %/ Þto move To SEARCH, then Press SET Press %/ Þto move To Performer Then press SETEntering the Disc Information Press %/ Þto move To Search Then press SETPress %/ Þto move To GENRE, then Press SET Press %/ Þto move To Title INPUT, then press SETPress %/ Þto move To Title Input Then press SET Press Text Display while MD is selected as the sourceEnter the disc title Referring to steps 3 Press %/ Þto move to the genre you want, then press SETSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCassette deck CD player-changer7/P Turntable0, 100+ Operating Video ComponentsDVD player Channel +Try to operate your TV by pressing TV/CATV DBS If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Release TV/CATV/DBSREC If there are more than one code listed for your brandRelease VCR Try to operate your VCR by pressing VCRManufacturers’ codes for TV Manufacturers’ codes for DBS tuner Manufacturers’ codes for VCR Manufacturers’ codes for Catv convertersNEC ESCITV Problem Possible Cause Solution TroubleshootingVideo SpecificationsAmplifier AudioGeneral FM tuner IHFAM MW/LW tuner EN, GE, FR, NL, SP, IT 0400HIMMDWJEIN

RX-7000RBK specifications

The JVC RX-7000RBK is a high-quality AV receiver that combines sophisticated technology with user-friendly features, making it a popular choice among audio enthusiasts and home theater setups. This receiver is designed to deliver superior sound performance while providing a host of options to cater to diverse audio and video formats.

At the heart of the RX-7000RBK is a robust amplifier capable of producing 100 watts per channel, ensuring powerful output that can fill any room with rich, dynamic sound. The receiver supports a variety of audio channels, allowing users to experience multi-channel surround sound, enhancing the overall cinematic experience whether you’re watching movies or listening to music.

One of the standout features of the RX-7000RBK is its compatibility with various surround sound formats. It supports Dolby Digital, DTS, and other advanced audio technologies, providing an immersive listening experience. The receiver also features a built-in Digital Signal Processor (DSP) that offers numerous sound modes to optimize audio playback, allowing users to tailor the sound to their preferences and the content being played.

Connectivity is another significant attribute of the RX-7000RBK. The receiver includes multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily switch between different sources without hassle. Additionally, it features analog inputs, optical and coaxial digital audio inputs, and a USB port for compatibility with a wide range of audio devices.

The RX-7000RBK also comes equipped with an FM/AM tuner, expanding its versatility by allowing users to enjoy their favorite radio stations. The receiver is designed with an intuitive onboard interface that makes navigation seamless, while the included remote control allows users to manage settings from a distance.

Another notable technology integrated into the RX-7000RBK is its energy-saving mode, which reduces power consumption when the receiver is not in use. This feature ensures that users can enjoy high-performance audio without worrying about excessive energy use.

Overall, the JVC RX-7000RBK is an exceptional AV receiver that combines powerful audio performance with a range of features and modern technologies. Its ability to support various audio formats, extensive connectivity options, and user-friendly design makes it a strong contender for anyone looking to enhance their home entertainment experience. Whether for film, music, or gaming, the RX-7000RBK delivers a versatile and enjoyable audio experience.
Top Page Image Contents