JVC RX-7000RBK manual Press %/ Þ/ @/ #to adjust the SEA mode as you want, To Tuner

Page 40

English

4. Press %/ Þto move to “SEA ADJUST.”

The SEA ADJUST menu appears.

5.Press %/ Þ/ @/ #to adjust the SEA mode as you want.

SEA ADJUST

SEA USERMODE

100 1k 10kHz

SET:MEMORY

“LFE ATT.”:

Set the low frequency effect attenuator

 

level (see page 15).

“COMP.”:

Set the dynamic range compression

 

(see page 15).

“DIGITAL 1/2/3”:

Set the digital input terminals

 

(see page 16).

“FL DISP.”:

Shows the disc text information on the

 

display (see page 17).

@/ # : Select the frequency ranges.

%/ Þ: Adjust the frequency levels.

6.Press SET to store the setting into the SEA USERMODE.

•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)

7.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Setting the Basic Setting Items (Also see

pages 13 – 17)

Notes:

*Not adjustable when “CENTER SPK” is set to “NONE” (see page 14).

**Not adjustable when “REAR SPK” is set to “NONE” (see page 14).

4.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Operating the Tuner (Also see pages 19 and 20)

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the % / Þ / @/ #buttons also displays the

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the %/ Þ / @/ #buttons also displays the

MAIN MENU.

2. Press %/ Þto move

to “TUNER

TUNER CONTROL

MAIN MENU.

2.Press %/ Þto move to “SETTING,” then

press @/ #.

The SETTING 1 or SETTING

SETTING 1

 

 

SUBWOOFER

: NO

FRONT

SPK

: LARGE

CENTER

SPK

: SMALL

REAR

SPK

: LARGE

CNTR DELAY

: 3msec

REAR DELAY

: 5msec

CONTROL,” then

press @/ #.

The TUNER CONTROL menu appears.

PRESET CH

: 1

 

BAND

 

:FM

 

FREQUENCY

: 87.50MHz

FM MODE

:AUTO MUTING

 

 

 

PRESET MEMORY

:OPERATE

2 menu appears.

CROSSOVER

:100Hz

NEXT

PAGE

3. Press %/ Þto move to the item you want to

3.Press %/ Þto move to the item you want to set or adjust, then press

@/ #.

•To go to the SETTING 2

menu, move to “NEXT PAGE,” then press @/ #.

•To go back to the SETTING

1 menu, move to “PREVIOUS PAGE,” then press @/ #.

:ENTER

SETTING 2

LFE ATT. : 0dB

COMP. : MID

DIGITAL 1 : DVD

DIGITAL 2 : CD

DIGITAL 3 : TV

FL DISP. : NORMAL

PREVIOUSPAGE

:ENTER

set or adjust, then press @/ #.

On the TUNER CONTROL menu, you can do the following:

“PRESET CH”:

Select a preset channel station.

“BAND”:

Select the band.

“FREQUENCY”:

Tune in a station manually.

“FM MODE”:

Select the FM reception mode.*

“PRESET MEMORY”: See “Storing the Preset Stations” on the next page.

Note:

* Not displayed when an AM (MW/LW) station is selected.

On the SETTING 1 and 2 menus, you can do the following:

“SUBWOOFER”:

Set the subwoofer information (see

 

page 13).

“FRONT SPK”:

Set the front speaker information (see

 

page 14).

“CENTER SPK”:

Set the center speaker information (see

 

page 14).

“REAR SPK”:

Set the rear speaker information (see

 

page 14).

“CNTR DELAY”:

Adjust the delay time of the center

 

speaker output (see page 14).*

“REAR DELAY”:

Adjust the delay time of the rear

 

speaker output (see page 14).**

“CROSSOVER”:

Set the crossover frequency

 

(see page 15).

4. When you finish, press EXIT repeatedly until the

menu disappears from the TV.

37

Page 39 Page 41
Image 40
Page 39 Page 41
Contents RX-7000RBK Per I’ltalia Achtung -- STANDBY/ON -SchalterEspañol Italiano Table of Contents Parts Identification Remote ControlFront Panel Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker About the speaker impedanceCassette deck or MD recorder CD playerVideo component connections TV and/or DBS tuner DVD playerDVD player DBS tunerDigital input terminals Digital connectionsDigital output terminal Connecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet R6PSUM-3/AA15FTurning the Power On and Off Standby From the remote controlBasic Operations Selecting the Source to PlayAdjusting the Volume Selecting the Front SpeakersEtc Turn Source Selector toAttenuating the Input Signal Adjusting the Subwoofer Output LevelMuting the Sound Reinforcing the BassBasic Settings Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Recording a SourcePress Setting repeatedly until Setting the Speakers for the DSP ModesRear Delay appears on Display Crossover FRQ Crossover Frequency appears on the display Turn Multi JOG to selectLFE ATT Low Frequency Effect Attenuator appears on Display Low frequency effect attenuator LevelDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeShowing the Text Information on Display Using the Sleep Timer Adjust the sound using the functions listed abovePress ONE Touch OPERATION. Onetouchoperation Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Assigning Names to Preset Stations Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations Searching for a Program by PTY CodesPress PTY Search while Listening to an FM stationPress PTY Search while listening to an FM station Turn Multi JOG until the PTYPTY codes Switching to a Broadcast Program of Your Choice Temporarily Press EON so that the last selectedProgram type appears on Display Press TA/NEWS/INFO untilUsing the SEA Modes Selecting Your Favorite SEA ModeCreating Your Own SEA Mode Press SEA Adjust repeatedly3D-PHONIC modes Using the DSP ModesDAP modes DVD Multi Playback Mode Surround modesBy pressing DSP Mode By pressing Surround Mode Available DSP Modes According to the Speaker ArrangementAvailable DSP modes FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Press Test again to stop the test tone. Test JVC Theater Surround adjustmentsRepeatedly until Theater Appears on the display To cancel the Dolby/DTS/MPEG Surround mode Theater appears on DisplayActivating the DSP Modes Select and play a sound sourceRepeatedly until the DSP mode you To cancel the DSP modeWant appears on the display For the other DSP modesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayUsing the On-Screen Menus Press @/ #to adjust Input Attenuator modePress %/ Þto move to Sound CONTROL, then press @/ # To BAL. BalanceTo SEA Mode To Surround LEVEL, then press@/ # Press %/ Þto move To SEA, then pressPress %/ Þ/ @/ #to adjust the SEA mode as you want Press SET to store the setting into the SEA UsermodePress %/ Þto move to SETTING, then Press @/ # Set or adjust, then press @/ #Press %/ Þto move to Preset Name Then press SET To PresetPress %/ Þto move to Tuner CONTROL, then press @/ # Press %/ Þ / @/ #to Move in front of a character you wantCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Disc Information screen appears on the TVPress Text Display while CD is selected as the source Press %/ Þto move To SEARCH, then Press SETPress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move To Search Then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationPress Text Display while MD is selected as the source Enter the disc title Referring to steps 3Press %/ Þto move to the genre you want, then press SET Press %/ Þto move To Title Input Then press SETOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player-changer 7/PTurntable Cassette deckOperating Video Components DVD playerChannel + 0, 100+If there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSIf there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR RECManufacturers’ codes for TV Manufacturers’ codes for DBS tuner Manufacturers’ codes for Catv converters Manufacturers’ codes for VCRITV ESCNEC Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierAudio VideoAM MW/LW tuner FM tuner IHFGeneral EN, GE, FR, NL, SP, IT 0400HIMMDWJEIN

RX-7000RBK specifications

The JVC RX-7000RBK is a high-quality AV receiver that combines sophisticated technology with user-friendly features, making it a popular choice among audio enthusiasts and home theater setups. This receiver is designed to deliver superior sound performance while providing a host of options to cater to diverse audio and video formats.

At the heart of the RX-7000RBK is a robust amplifier capable of producing 100 watts per channel, ensuring powerful output that can fill any room with rich, dynamic sound. The receiver supports a variety of audio channels, allowing users to experience multi-channel surround sound, enhancing the overall cinematic experience whether you’re watching movies or listening to music.

One of the standout features of the RX-7000RBK is its compatibility with various surround sound formats. It supports Dolby Digital, DTS, and other advanced audio technologies, providing an immersive listening experience. The receiver also features a built-in Digital Signal Processor (DSP) that offers numerous sound modes to optimize audio playback, allowing users to tailor the sound to their preferences and the content being played.

Connectivity is another significant attribute of the RX-7000RBK. The receiver includes multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily switch between different sources without hassle. Additionally, it features analog inputs, optical and coaxial digital audio inputs, and a USB port for compatibility with a wide range of audio devices.

The RX-7000RBK also comes equipped with an FM/AM tuner, expanding its versatility by allowing users to enjoy their favorite radio stations. The receiver is designed with an intuitive onboard interface that makes navigation seamless, while the included remote control allows users to manage settings from a distance.

Another notable technology integrated into the RX-7000RBK is its energy-saving mode, which reduces power consumption when the receiver is not in use. This feature ensures that users can enjoy high-performance audio without worrying about excessive energy use.

Overall, the JVC RX-7000RBK is an exceptional AV receiver that combines powerful audio performance with a range of features and modern technologies. Its ability to support various audio formats, extensive connectivity options, and user-friendly design makes it a strong contender for anyone looking to enhance their home entertainment experience. Whether for film, music, or gaming, the RX-7000RBK delivers a versatile and enjoyable audio experience.
Top Page Image Contents