JVC RX-7000RBK Turn Multi JOG until the PTY, Press PTY Search while listening to an FM station

2. Turn MULTI JOG until the PTY	MULTI JOG
code you want appears on the
display, while “PTY SELECT” is
flashing.

The display gives you the PTY codes described to the right.

3. Press PTY SEARCH again, while PTY SEARCH the PTY code selected in the previous step is still on the display.

While searching, “SEARCH” and the selected PTY code alternate on the display.

The receiver searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

To continue searching after the first stop

Press PTY SEARCH again while the indications on the display are flashing.

If no program is found, “NOTFOUND” appears on the display.

From the remote control:

PTY codes

	None
Alarm !		News
TEST		Affairs
Documemt		Info (Information)
Folk M (Music)		Sport
Oldies	Educate (Education)
Nation M (Music)		Drama
Country		Culture
Jazz		Science
Leisure		Varied
Travel		Pop M (Music)

English

1. Press PTY SEARCH while listening to an FM station.

“PTY SELECT” flashes on the display.

2.Press and hold PTY –/+ until the PTY code you want appears on the display, while “PTY SELECT” is

flashing.

The display gives you the PTY codes described to the right.

3.Press PTY SEARCH again, while the PTY code selected in the previous step is still on the display.

PLAY

PTY SEARCH

	FF/
PTY SEARCH	PTY
/REW
PTY	PTY SEARCH

PLAY

PTY SEARCH

Phone In	Rock M (Music)
Religion	Easy M (Music)
Social	Light M (Music)
Children	Classics
Finance	Other M (Music)
	Weather

When an emergency broadcast (Alarm ! signal) is sent from an

While searching, “SEARCH” and the selected PTY code alternate on the display.

The receiver searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

To continue searching after the first stop

Press PTY SEARCH again while the indications on the display are flashing.

If no program is found, “NOTFOUND” appears on the display.

FM station:

The receiver automatically tunes in the station except in the following cases:

•When you are listening to non-RDS stations (all AM — MW/LW and some FM stations).

•When the receiver is in standby mode.

While receiving an emergency broadcast, “Alarm !” appears on the display.

The TEST signal is used for equipment test — whether it can receive the Alarm ! signal correctly.

The TEST signal makes the receiver work in the same way as the Alarm ! signal does. If the TEST signal is received, the receiver automatically switches to the station broadcasting the TEST signal. While receiving the test signal, “TEST” appears on the display.

22